Library Search on Influence of Oscillation Parameters on Surface Quality of Billets & Blooms
نویسندگان
چکیده
Molten metal meniscus profile and mold flux channel width were measured under high frequency magnetic field by model experiments, then the dynamic pressure in mold flux channel were calculated during one mold oscillation period. It is found that the high frequency magnetic field can decrease the dynamic pressure greatly, which may be one mechanism of improving the billets surface quality by the soft-contact mold electromagnetic continuous casting. Based on this study, a novel technology named AmplitudeModulated Magnetic Field (AMMF) coupled with mold oscillation in electromagnetic continuous casting was proposed in order to balance the dynamic pressure caused by mold oscillation with a varied electromagnetic force inducted by AMMF. Based on the calculation of mold flux channel dynamic pressure, a model to optimize design of AMMF was proposed. Then continuous casting experiments under AMMF coupled with mold oscillation were carried out. It is shown that AMMF is effective in reducing the friction force during continuous casting and improving the billets surface quality.
منابع مشابه
Influence of EDM Characteristic Parameters on the Surface Microstructure in CK45 Alloy Steel
Electro Discharge Machining (EDM) is a very efficient machining process widely used in manufacturing components of complicated geometry. Based on its nature, i.e. material removal by electric discharge, the process induces thermal stresses that in turn result in generation of wide spread micro-cracks on the surface of the machined part. In this paper the influence of EDM characteristic paramete...
متن کاملContinuous Casting of Incoloy800H Superalloy Billet under an Alternating Electromagnetic Field
We experimentally investigate the influence of an alternating electromagnetic field on the surface and internal qualities of Incoloy800H superalloy billets. The electromagnetic continuous casting experiments for Incoloy800H superalloy were successfully conducted and the billets (0.1 m ˆ 0.1 m ˆ 1.2 m) were obtained. We figure out that the high frequency (20.4 kHz) electromagnetic field which is...
متن کاملThe Effects of Hot Tear Segregations on the Rolled Product Quality of Continuously Cast Steel
The main objective of this project was to investigate the behavior and the damaging effects of hot tear segregations in the continuously cast steel blooms on the final product quality. To achieve this aim, plant data from three different types of steels were used. Investigations using the scanning electron microscope (SEM) equipped with energy dispersive x-ray spectroscopy (EDS) probe and metal...
متن کاملAn investigation on the effects of camshaft surface defects on producing high-frequency noises in internal combustion engines
Valvetrain is one of the major sources of noise and vibration in IC engines. The importance of cam surface quality parameters is highlighted in the valve train mechanisms with direct sliding contact between cam and tappet. In this paper, the influence of surface quality parameters on high frequency noise producing is investigated. The roughness and waviness of some intake and exhaust camshafts ...
متن کاملAn Experimental Investigation on Surface Roughness and Edge Chipping in Micro Ultrasonic Machining
Surface quality including surface roughness and edge chipping is a key process measure in micro ultrasonic machining (Micro-USM) as an efficient process for micromachining of hard and brittle materials. Process parameters such as ultrasonic vibration amplitude, static load, type of tool material, type and size of abrasive particles and slurry concentration can influence the surface quality. How...
متن کامل