Assessing the Usefulness of the Quasi-ideal Observer for Quality Control in Fluoroscopy.

The aim of this work was to evaluate the reliability of the square of the signal-to-noise ratio rate, [Formula: see text], as a precise measurement for quality control test in a digital fluoroscopy system. The quasi-ideal model observer was used to measure [Formula: see text] The dose rate, pulse rate and field of view were varied, and their effect on dose efficiency, defined as [Formula: see text], was evaluated (where [Formula: see text] is the air kerma-area product rate). Measurements were repeated to assess reproducibility. The relative standard deviation in [Formula: see text] over seven consecutive measurements was 5 %. No significant variation in [Formula: see text] was observed across different pulse rates (10-30 pulses s(-1)). The low-dose-rate setting had a superior dose efficiency compared with the medium- and high-dose-rate settings. A smaller field of view resulted in higher dose efficiency.The results show that [Formula: see text] measurements offer the high precision required in quality control constancy tests.