Statics Analysis of Cylindrical Gear Drive at Any Meshing Position Based on Ansys
نویسندگان
چکیده
The transform relation between the meshing position and rotation angle of a cylindrical gear pair is firstly derived according to the theory of gear meshing. Then the technique of building the assembly model of a cylindrical gear pair at specified meshing position in ANSYS is researched. On this basis, a new method to perform static contact analysis of cylindrical gear at any meshing location is proposed. In comparison with the conventional method, the maximum working stress of the gear in a meshing cycle can be accurately calculated by this method. Simulation results show that the proposed method is reasonable, and it provides the foundation for further study of the fatigue life analysis and structural optimization of the cylindrical gear transmission.
منابع مشابه
Meshing Error of elliptic cylinder gear based on tooth contact analysis
In order to study the dynamic meshing characteristics of the elliptic cylinder gear and obtain the meshing error of the gear transmission system, the two-dimensional static contact analysis of the gear tooth surface is carried out by using ANSYS software, and the key parts of the contact area of the tooth surface are determined. Then, the dynamic meshing model of the elliptic cylinder gear is e...
متن کاملDynamic Meshing Characteristics of Elliptic Cylinder Gear Based on Tooth Contact Analysis
As the most important working area of gear, teeth play the role of transmitting load and power. Tooth line and tooth profile are the two main characteristics of the tooth surface, which affect the shape of the tooth surface, tooth meshing characteristics and contact characteristics. Taking the elliptical cylinder gear pair in the reversing device of a new type of drum pumping unit as the resear...
متن کاملMethod of Processing and an Analysis of Meshing and Contact of Circular Arc Tooth Trace Cylindrical Gears
This paper presents the investigation into the tooth profile features, meshing characteristics and the principle of forming circular arc tooth race cylindrical gears (CATT gears). Based on the meshing theory of the curvilinear gear, tooth surface equations and meshing line equations of the gears and rack shave been established. The graphical analysis of these equations shows meshing performance...
متن کاملResearch on Tooth Modification of Spur Bevel Gear
Isometric modification is proposed as a new method of axial modification of spur bevel gear. Based on the gear geometry theory and the normal meshing motion equation of gear pairs, changes of meshing points and angles are analyzed and the effect of axial modification on meshing movement of gear pairs is discussed. After that, a method of drawing spherical involute with the aid of SolidWorks sof...
متن کاملResearch on Problems of Fracture Mechanics About the Spur Gears with Cracked Tooth
Taking the spur gear as the object of study, based on the dynamic analysis of gear transmission system, the dynamic stress intensity factors of cracked gear teeth are studied by using ANSYS software. The calculation of dynamic stress intensity factor is realized by ANSYS parametric design language. Firstly, the involute tooth profile equation and the root transition curve equation of the gear t...
متن کامل