Measuring electrical current during scanning probe oxidation
نویسندگان
چکیده
منابع مشابه
Scanning hall probe microscopy technique for investigation of magnetic properties
Scanning Hall Probe Microscopy (SHPM) is a scanning probe microscopy technique developed to observe and image magnetic fields locally. This method is based on application of the Hall Effect, supplied by a micro hall probe attached to the end of cantilever as a sensor. SHPM provides direct quantitative information on the magnetic state of a material and can also image magnetic induction under a...
متن کاملScanning hall probe microscopy technique for investigation of magnetic properties
Scanning Hall Probe Microscopy (SHPM) is a scanning probe microscopy technique developed to observe and image magnetic fields locally. This method is based on application of the Hall Effect, supplied by a micro hall probe attached to the end of cantilever as a sensor. SHPM provides direct quantitative information on the magnetic state of a material and can also image magnetic induction under a...
متن کاملDecrease of Electrical Conductivity Activation Energy of Co-coated AISI 430 Alloy for the Application of SOFCs
The application of conductive coatings on ferritic stainless steel can decrease electrical conductivity. Theaim of this research was to investigate the electrical conductivity of cobalt coated AISI 430 ferritic stainlesssteel by pack cementation technique. Coated coupons were analyzed using scanning electron microscopy(SEM). Electrical conductivity of the coated substrates was measured as a fun...
متن کاملOpen carbon nanopipettes as resistive-pulse sensors, rectification sensors, and electrochemical nanoprobes.
Nanometer-sized glass and quartz pipettes have been widely used as a core of chemical sensors, patch clamps, and scanning probe microscope tips. Many of those applications require the control of the surface charge and chemical state of the inner pipette wall. Both objectives can be attained by coating the inner wall of a quartz pipette with a nanometer-thick layer of carbon. In this letter, we ...
متن کاملHybrid Model for Bulk Current Injection Probe
A new hybrid-model for BCI probe is derived . This model is built based on the probe's internal structure without refinements, and by carrying out just one electrical measurement for the reflection coefficient, so that it can be generalized and used in studying the effect of layout parameters in the aim of improving the probe high frequency performance, which helps the developer in design stage...
متن کامل