Beam-based Optical Tuning of the Final Focus Test Beam*
نویسندگان
چکیده
P. Tenenbaum, D. Burke, S. Hartman, R. Helm, J. Irwin, R. Iverson, P. Raimondi, W. Spence Stanford Linear Accelerator Center, Stanford University, Stanford, CA 94309 USA V. Bharadwaj, M. Halling, J. Holt Fermi National Accelerator Laboratory, Batavia, Illinois, USA J. Buon, J. Jeanjean, F. Le Diberder, V. Lepeltier, P. Puzo** Laboratoire de l’Accélérateur Linéaire, Orsay, France K. Oide, T. Shintake, N. Yamamoto National Laboratory for High Energy Physics, KEK, Tsukuba, Japan
منابع مشابه
First Results from the Final Focus Test Beam*
We have used the Final Focus Test Beam beamline and associated instrumentation to reduce the 46.6 GeV SLAC electron beam to a vertical size of 70 nm. This represents a reduction from the linac beam size by a factor of 320, comparable to the demagnification required by a TeV-scale linear collider, and addresses the same aberrations predicted in such an environment. The beam dimensions were measu...
متن کاملBand-Gap Tuning Of Electron Beam Evaporated Cds Thin Films
The effect of evaporation rate on structural, morphological and optical properties of electron beam evaporated CdS thin films have been investigated. CdS thin film deposited by electron beam evaporation method in 12nm/min and 60nm/min evaporation rates on glass substrates. X-ray diffraction, scanning electron microscopy, UV-Vis-NIR spectroscopy and Atomic Force Microscopy were used to character...
متن کاملExpanded Studies of Linear Collider Final Focus Systems at the Final Focus Test Beam
In order to meet their luminosity goals, linear colliders operating in the center-of-mass energy range from 350 to 1,500 GeV will need to deliver beams which are as small as a few nanometers tall, with x:y aspect ratios as large as 100. The Final Focus Test Beam (FFTB) is a prototype for the final focus demanded by these colliders: its purpose is to provide demagnifications equivalent to those ...
متن کاملBeam-based Alignment, Tuning and Beam Dynamics Studies for the Atf2 Extraction Line and Final Focus System*
Using a new extraction line currently under construction, the ATF2 experiment plans to test the novel compact final focus optics design with local chromaticity correction intended for use in future linear colliders. With a 1.3 GeV design beam of 30nm normalised vertical emittance extracted from the ATF damping ring, the primary goal is to achieve a vertical spot-size at the IP waist of 37nm. We...
متن کاملBeam Based Alignment of the SLC Final Focus Sextupoles*
The strong demagnification inherent in final focus systems requires local cancellation of the resulting chromaticity. Strong sextupole pairs separated by a -I transform are positioned x12 in betatron phase away from the Interaction Point (IP) in order to cancel chromatic aberrations primarily due to the final quadrupoles. Sextupole alignment is critical in order to provide orthogonal tuning of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1997