Meso-Structuring of SiCN Ceramics by Polystyrene Templates
نویسندگان
چکیده
A simple one-pot synthesis of well-defined PS-silazane nano-composites (polystyrene, PS) is described. In contrast to the, thus far, used two-step procedure ((1) assembly of a PS template bed and (2) careful filling of the voids between the PS spheres), which is restricted to macro structuring, we are able to simply mix the PS template and a commercially available silazane precursor HTT-1800 in toluene. The key is the alteration of the zeta potential of the PS template leading to a homogeneous dispersion in the silazane-toluene mixture. Removal of solvent gives rise to a highly ordered PS-silazane nano-composites and subsequent pyrolysis leads to mesoporous silicon carbonitride (SiCN) materials. The one-pot procedure has two advantages: easy upscaling and the use of PS spheres smaller than 100 nm in diameter, here 60 nm. The PS template was characterized by photon correlation spectroscopy, zeta potential measurements, scanning electron microscopy (SEM), and thermal gravimetric analysis (TGA). The resulting mesoporous SiCN materials were analyzed by SEM, transmission electron microscopy (TEM), nitrogen sorption analysis, and Fourier transform infrared measurements (FT-IR).
منابع مشابه
New Insights into Understanding Irreversible and Reversible Lithium Storage within SiOC and SiCN Ceramics
Within this work we define structural properties of the silicon carbonitride (SiCN) and silicon oxycarbide (SiOC) ceramics which determine the reversible and irreversible lithium storage capacities, long cycling stability and define the major differences in the lithium storage in SiCN and SiOC. For both ceramics, we correlate the first cycle lithiation or delithiation capacity and cycling stabi...
متن کاملOn the Mass Fractal Character of Si-Based Structural Networks in Amorphous Polymer Derived Ceramics
The intermediate-range packing of SiNxC4-x (0 ≤ x ≤ 4) tetrahedra in polysilycarbodiimide and polysilazane-derived amorphous SiCN ceramics is investigated using 29Si spin-lattice relaxation nuclear magnetic resonance (SLR NMR) spectroscopy. The SiCN network in the polysilylcarbodiimide-derived ceramic consists predominantly of SiN₄ tetrahedra that are characterized by a 3-dimensional spatial di...
متن کاملSilicoboron–carbonitride ceramics: A class of high-temperature, dopable electronic materials
The structure and electronic properties of polymer-derived silicoboron–carbonitride ceramics are reported. Structural analysis using radial-distribution-function formalism showed that the local structure is comprised of Si tetrahedra with B, C, and N at the corners. Boron doping of SiCN leads to enhanced p-type conductivity ~0.1 V cm at room temperature!. The conductivity variation with tempera...
متن کاملFabrication of SiCN thin film on a substrate and measurement of sheet resistivity Literature Review
ilicon Carbonitride (SiCN) is a novel polymer derived ceramic material, which is not only mechanically, chemically and thermally robust, but also possesses functional properties. These properties yields SiCN as an excellent choice for sensor applications in high temperatures with harsh chemical conditions. The principal objective of the research is to develop the underlying materials science fo...
متن کاملCharacterization of Thick and Thin Film SiCN for Pressure Sensing at High Temperatures
Pressure measurement in high temperature environments is important in many applications to provide valuable information for performance studies. Information on pressure patterns is highly desirable for improving performance, condition monitoring and accurate prediction of the remaining life of systems that operate in extremely high temperature environments, such as gas turbine engines. A number...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 5 شماره
صفحات -
تاریخ انتشار 2015