Optimizing the Jiles–Atherton Model of Hysteresis by a Genetic Algorithm
نویسندگان
چکیده
Modeling magnetic components for simulation in electric circuits requires an accurate model of the hysteresis loop of the core material used. It is important that the parameters extracted for the hysteresis model be optimized across the range of operating conditions that may occur in circuit simulation. This paper shows how to extract optimal parameters for the Jiles–Atherton model of hysteresis by the genetic algorithm approach. It compares performance with the well-known simulated annealing method and demonstrates that improved results may be obtained with the genetic algorithm. It also shows that a combination of the genetic algorithm and the simulated annealing method can provide an even more accurate solution than either method on its own. A statistical analysis shows that the optimization obtained by the genetic algorithm is better on average, not just on a one-off test basis. The paper introduces and applies the concept of simultaneous optimization for major and minor hysteresis loops to ensure accurate model optimization over a wide variety of operating conditions. It proposes a modification to the Jiles–Atherton model to allow improved accuracy in the modeling of the major loop.
منابع مشابه
Genetic Algorithms and Simulated Annealing Applied to the Identification of Hysteresis Models
This paper tests two heuristic approaches by applying them to the magnetic hysteresis model parameter identification. Both Preisach and Jiles-Atherton hysteresis models have been used. The implemented investigated heuristics are genetic algorithm and simulated annealing. Both the heuristic algorithms efforts the knowledge of the B-H experimental points of the hysteresis loop to be modeled accor...
متن کاملParameters Identification of Fluxgate Magnetic Core Adopting the Biogeography-Based Optimization Algorithm
The main part of the magnetic fluxgate sensor is the magnetic core, the hysteresis characteristic of which affects the performance of the sensor. When the fluxgate sensors are modelled for design purposes, an accurate model of hysteresis characteristic of the cores is necessary to achieve good agreement between modelled and experimental data. The Jiles-Atherton model is simple and can reflect t...
متن کاملMicrosoft Word - part_6_1
Introduction The models of magnetic devices having a magnetic core without known parameters require the core evaluation by means of sophisticated measurement procedures and systems. For certain models, higher measurement accuracy is of key importance. For the other models, additional factors (speed, cost, measurement instruments and apparatus) may strongly limit achievement of the specific meas...
متن کاملScience Arts & Métiers (sam) Rindra Ramarotafika, Abdelkader Benabou, Stéphane Clenet -stochastic Jiles-atherton Model Accounting for Soft Magnetic Material Properties Variability -compel: the International
Industrial processing (cutting, assembly...) of steel laminations can lead to significant modifications in their magnetic properties. Moreover, the repeatability of these modifications is not usually verified because of the tool wear or, more intrinsically, to the manufacturing process itself. When investigating the iron losses, it is generally observed that the hysteresis losses contribution a...
متن کاملThe Parameters Identification of Magnetic Core Using Fruit Fly Optimization Algorithm
This paper is concerned about the parameters identification of the Jiles-Atherton hysteresis loop model using Fruit Fly Optimization Algorithm (FOA). An improved Fruit Fly optimization algorithm (IFOA) is proposed to overcome the drawback of FOA, such as easily falling into local optimum, low precision, and poor stability. The IFOA has been applied to identify Jiles-Atherton model parameters of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001