Effect of Aspect Ratio on Supercritical Heat Transfer of Cryogenic Methane in Rocket Engine Cooling Channels
نویسندگان
چکیده
The supercritical turbulent flow of cryogenic methane flowing in a rocket engine cooing channel is numerically analysed by imposing constant heat flux at the bottom surface of the channel. The calculation scheme is validated by comparing the results obtained with experimental results reported in literature. The heat transfer coefficient is influenced by the strong variation in thermophysical properties of methane at super critical pressure. An increasing trend in the average value of Nusselt number is observed with aspect ratio. The efficacy of both Modified Jackson and Hall and Bishop empirical correlations in predicting Nusselt number is tested for cryogenic methane flowing in coolant channels.
منابع مشابه
CFD and Numerical Analysis for The Prediction of Effect of Aspect Ratio Five on The Heat Transfer Characteristics of Regeneratively Cooled Thrust Chamber with Rectangular Cooling Channels
In this paper, Computational Fluid Dynamics technique and numerical analysis is used to investigate the rocket thrust chamber cooling characteristics. The scope of the investigation involves the study of effect of aspect ratio (height/width) on the heat transfer characteristics of coolant channel. Steady state pressure based analysis of semi cryogenic thrust chamber regenerative cooling channel...
متن کاملNumerical Predictions of Turbulent Mixed Convection Heat Transfer to Supercritical Fluids Using Various Low Reynolds Number k-e Turbulence Models
There are a number of systems in which supercritical cryogenic fluids are used as coolants or propellant fluids. In some modern military aircraft, the fuel is pressurized above its critical point and used as a coolant to remove heat from the aircraft engine. Accurate prediction of heat transfer coefficients to turbulent flows of supercritical fluids is essential in design of such systems. One o...
متن کاملTwo Phase Flow Simulation for Subcooled Nucleat Boiling Heat Transfer Calculation in Water Jacket of Diesel Engine
Basic understanding of the process of coolant heat transfer inside an engine is an indispensable prerequisite to devise an infallible cooling strategy. Coolant flow and its heat transfer affect the cooling efficiency, thermal load of heated components, and thermal efficiency of a diesel engine. An efficient approach to studying cooling system for diesel engine is a 3D computational fluid dynami...
متن کاملTowards an Analytical Model for Film Cooling Prediction using Integral Turbulent Boundary layer
The objective of this work is to develop deep theoretical methods that are based on the solution of the integral boundary layer equations for investigating film cooling in liquid rocket engine. The integral model assumes that heat is transferred from hot free stream gas to the liquid film both by convection and radiation. The mass is transferred to the free srteam gas by the well-known blowing ...
متن کاملDerivation of Specific Heat Rejection Correlation in an SI Engine; Experimental and Numerical Study
The thermal balance analysis is a useful method to determine energy distribution and efficiency of internal combustion (IC) engines. In engines cooling concepts, estimation of heat transfer to brake power ratio, as one of the most significant performance characteristics, is highly demanded. In this paper, investigation of energy balance and derivation of specific heat rejection is carried out e...
متن کامل