Computation of the frequency-response gain of sampled-data systems via projection in the lifted domain
نویسندگان
چکیده
This paper addresses the computation of the frequency response gain of sampled-data systems with their intersample behavior taken into account. The proposed method is based upon a novel necessary and sufficient condition for the frequency-response gain to be less than a given γ > 0 and thus can be used as a basis for a bisection algorithm. Unlike all currently existing results, the proposed procedure requires the operator γI − D̆11D̆ ∗ 11 neither to be positive nor even to be invertible, thus eliminating unnecessary restrictions of the existing approaches (here D̆11 stands for the feedthrough term of the lifted system).
منابع مشابه
Computation of Earthquake Response via Fourier Amplitude Spectra
A theoretical relation is presented between the seismological Fourier amplitude spectrumand the mean squared value of the elastic response, which is defined by Gaussian distribution. Byshifting a general process to its mean value, spectrum of the mean squared value of the displacementis computed from the Fourier amplitude spectrum and the real part of the relative displacementtransfer function ...
متن کاملFrequency response of sampled-data systems
This paper introduces the concept of frequency response for sampled-data systems, and explores some basic properties as well as its computational procedures. It is shown that i) by making use of the lifting technique the notion of frequency response can be naturally introduced to sampled-data systems in spite of their time-varying characteristics, ii) it represents a frequency domain steady sta...
متن کاملComputation of Frequency Response Gain of Sampled-data Systems
Abstract: This paper provides a condition to determine the frequency response gain of sampled-data systems is less than a given positive number for its bisection computation. In contrast to existing conditions, there is no assumption on the norm of the related state space compression operators. The derived condition also unifies the computation of the frequency response gain of sampled-data sys...
متن کاملOutput-only Modal Analysis of a Beam Via Frequency Domain Decomposition Method Using Noisy Data
The output data from a structure is the building block for output-only modal analysis. The structure response in the output data, however, is usually contaminated with noise. Naturally, the success of output-only methods in determining the modal parameters of a structure depends on noise level. In this paper, the possibility and accuracy of identifying the modal parameters of a simply supported...
متن کاملStructural Properties of Multirate Sampled-Data Systems
The application of Networked Control Systems (NCS) in which sensory and control signals are transmitted via shared data communication networks, is growing significantly and these systems have been the subject of research during the last decade. On the other hand, multirate sampled data systems have been investigated since a long time. In this paper, conditions under which a networked control sy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- IEEE Trans. Automat. Contr.
دوره 47 شماره
صفحات -
تاریخ انتشار 2002