Another Look - Wave Solder Process for Surface Mount Applications
نویسنده
چکیده
منابع مشابه
Plastic Package Moisture-Induced Cracking
With the older “through-hole” technology packages such as the Dual In-line Package (DIP), soldering to printed circuit boards was accomplished using a wave solder. The DIP leads went through holes in the printed circuit board, where they were exposed to molten solder during the mounting process. The DIP’s body was never subjected directly to the solder melt, because it was protected from the he...
متن کاملStudy of the Rheological Behaviors of Solder Paste
Solder paste is a homogeneous, stable suspension of solder powder particles suspended in a flux binder, and is one of the most important process materials today in surface mount technology (SMT). By varying the solder particle size, distribution and shape, as well as the other constituent materials, the rheology and printing performance of solder pastes can be controlled. Paste flow behavior is...
متن کاملElectroless NickeVImmersion Gold Finishes - 2 for Application to Surface Mount Technology : ~ - A Regenerative Approach
ine pitch surfact mount technology (SMT) devices are forcing F the industry to look for alternatives to the traditional hot-air solder leveling (HASL) process. Although HASL gives an excellent surface for solderability it has its shortcomings. HASL finishes are not flat (see Fig. I), they contain lead, are not aluminum or gold wire-bondable and the resulting board has already undergone a therma...
متن کاملEvaluation of Water Soluble and No-Clean Solder Pastes with Palladium Plated and Solder Plated SMT Devices
In response to increasing environmental concern over the use of chlorofluorocarbons (CFC's) to clean printed circuit assemblies, many surface mount operations are converting to water soluble or no-clean type solder pastes. Current trends indicate that this conversion will progress rapidly until water soluble and no-clean pastes constitute the majority of the product mix. With the introduction o...
متن کاملSolder Paste Stencil for Surface Mount Technology
Solder paste masks or stenc.ils are an integral part of the manufacturing process for surface mount circuit boards. This study will examine the feasibility of developing a process for rapidly ' Currently at IUA-Tencor Corporation, San Jose, CA 0-7803-6482-1 /OO/$lO.OO 02000 IEEE 2000 IEEWCPMT Int'l Electronics Manufactluring Technology Symposium
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004