Large Strain Range Dynamic Testing at High and Medium Strain Rates, Using a Common Scale SHPB
نویسندگان
چکیده
منابع مشابه
PREDICTION OF HOT DEFORMATION BEHAVIOUR OF A PH STAINLESS STEEL AT HIGH STRAIN RATES
In this study the hot deformation behaviour of a precipitation hardened (PH) stainless steel at high strain rates has been predicted through hot compression testing. Stress-strain curves were obtained for a range of strain rates from 10-3 to 10+1 S-1 and temperatures from 850 to 1150°C. Results obtained by microstructure and stress-strain curves show that at low temperatures and high strain rat...
متن کاملInfluence of High Strain Rates on the Mechanical Behavior of High-Manganese Steels
In this work, dynamic mechanical properties of three high-manganese steels with TRIP/TWIP or fully TWIP characteristics are studied. High strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. All the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). Bu...
متن کاملبررسی عددی و ارائه یک مدل ساختاری ترکیبی برای بتن تحت تاثیر بارگذاری با نرخ کرنش نسبتا بالا
Abstract Many concrete structures may be exposed to high rate dynamic loadings like impacts, explosions, etc. Thus, it is necessary to know the behavior of this material in order to predict the response of the structure. Understanding the response of concrete at high strain rates is a main factor both for a successful design of protective structures and reducing the damage of constructions....
متن کاملUsing split Hopkinson pressure bars to perform large strain compression tests on polyurea at low, intermediate and high strain rates
The strain rate sensitivity of polyurea is characterized using a modified split Hopkinson pressure bar (SHPB) system. The device is composed of a hydraulic piston along with nylon input and output bars. In combination with an advanced wave deconvolution method, the modified SHPB system provides an unlimited measurement time and thus can be used to perform experiments at low, intermediate and hi...
متن کاملMechanical Behavior of TWIP Steel in High Strain Rate Torsional Test
Advanced high strength steels (AHSS) have recently attracted great attention because of their superior mechanical properties. A modern group of these steels, known as twinning induced plasticity (TWIP) steels, shows a unique combination of strength and ductility even at high rates of strain. In order to examine the functionality of such steels in dynamic loading conditions, their mechanical beh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017