Compliant Coatings: a Decade of Progress

نویسنده

  • Mohamed Gad-el-Hak
چکیده

This brief article reviews the important developments in the field of compliant coatings that took place in the past ten years. During this period progress in theoretical and computational methods somewhat outpaced that in experimental efforts. There is no doubt that compliant coatings can be designed to delay transition and to suppress noise on marine vehicles as well as other practical hydrodynamic devices. Transition Reynolds numbers that exceed by an order of magnitude those on rigid-surface boundary layers can be achieved. There is renewed evidence of favorable interactions of compliant coatings even for air flows and even for turbulent boundary layers, but more research is needed to confirm these latest results.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effects of compliant coatings on radiated sound from a rigid-wall turbulent boundary layer

A theoretical model is developed to investigate the effect of compliant coatings on radiated sound from low Mach-number turbulent boundary layers over otherwise rigid surfaces. Lighthill’s analogy is employed and the primary noise source is assumed to be from wall-pressure fluctuations. Parametric studies are performed on the behavior of the material properties such as the speed of sound and de...

متن کامل

Corrosion Protection Performance of Nanoclay-Polyester Nanocomposite Coatings

In this paper, polymer-based nanocomposites powder were applied on the surface of plain carbon steel by electrostatic device and then were cured by microwave. The effect of adding nanoparticles on the corrosion resistance properties of the coatings was investigated by Electrochemical Impedance Spectroscopy and immersion test in 3.5 NaCl solution. Coatings structure and morphology of nanoparticl...

متن کامل

Effects of nano silica on the Anticorrosive properties of epoxy coatings

In this study a series of epoxy/silica nanocomposites were prepared by using nano silica particles which had different surface modifications. The morphology of the nanocomposite coatings was characterized by scanning electron microscopy SEM. The effects of the hydrophilic and hydrophobic feature of the nano particles on the Tg and anticorrosive properties of nanocomposite coatings were evaluate...

متن کامل

Optimization of a Waterborne Epoxy Coatings Formulation via Experimental Design

Waterborne Epoxy based coatings were prepared by using a water-borne epoxy resin and a suitable hardener. The formulation and optimization procedure were carried out on the bases of experimental designs by the mixture design technique in which the important paint properties are modeled by using special cubic model. The corrosion behavior of these coatings was investigated using electrochemical ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1996