Biosorptive Removal of Ni(Ii) from Wastewater and Industrial Effluent
نویسندگان
چکیده
The objective of the present work was to investigate the removal of Ni(II) by the fresh biomass (FBM) and chemically treated leached biomass (LBM) of Calotropis procera. The scope of the work included screening of the biosorbents for their metal uptake potential, batch equilibrium, column mode removal studies and kinetic studies at varying pH (2-6), contact time, biosorbent dosages (1-25 g/L) and initial metal ion concentration (5-500 mg/L). The development of batch kinetic model and determination of order, desorption studies, column studies were investigated. It was observed that pH had marked effect on the Ni(II) uptake. Langmuir and Freundlich models were used to correlate equilibrium data on sorption of Ni(II) metallic ion by using both FBM and LBM at 28 degrees C and pH 3 and different coefficients were calculated. It was found that both biomasses were statistically significant fit for Freundlich model. The biomass was successfully used for removal nickel from synthetic and industrial effluents and the technique appears industrially applicable and viable.
منابع مشابه
A Study on Membrane Bioreactor for Water Reuse from the Effluent of Industrial Town Wastewater Treatment Plant
Background: Considering the toxic effects of heavy metals and microbial pathogens in industrial wastewaters, it is necessary to treat metal and microbial contaminated wastewater prior to disposal in the environment. The purpose of this study is to assess the removal of heavy metals pollution and microbial contamination from a mixture of municipal and industrial wastewater using membrane biorea...
متن کاملAdsorption of Copper(II) from an Wastewater Effluent of Electroplating Industry by Poly(ethyleneimine)-Functionalized Silica
The poly(ethyleneimine)-functionalized silica has been developed successfully as an effective adsorbent for the adsorption removal of Cu(II) ions from electroplating wastewater. The influences of pH, contact time and initial concentration of Cu(II) ions on the adsorption capacity and the effect of adsorbent dosage on the removal efficiency of Cu(II) ions from electroplatin...
متن کاملCombined Industrial Wastewater Treatment in Anaerobic Bioreactor Posttreated in Constructed Wetland
Constructed wetland (CW) with monoculture of Arundo donax L. was investigated for the posttreatment of anaerobic bioreactor (ABR) treating combined industrial wastewater. Different dilutions of combined industrial wastewater (20, 40, 60, and 80) and original wastewater were fed into the ABR and then posttreated by the laboratory scale CW. The respective removal efficiencies of COD, BOD, TSS, ni...
متن کاملA Study on Membrane Bioreactor for Water Reuse from the Effluent of Industrial Town Wastewater Treatment Plant
Background: Considering the toxic effects of heavy metals and microbial pathogens in industrial wastewaters, it is necessary to treat metal and microbial contaminated wastewater prior to disposal in the environment. The purpose of this study is to assess the removal of heavy metals pollution and microbial contamination from a mixture of municipal and industrial wastewater using membrane bioreac...
متن کاملImproving Removal of Nickel from Wastewater using Palm Leaf Ash as a Biosorbent
Nickel (Ni) as a heavy metal due to its toxicity should be removed from wastewater and aquatic environments using efficient technology. The aim of this study was to remove Ni from an aqueous solution using palm leaf ash produced in a furnace. To do so, kinetic and thermodynamic experiments were conducted on the adsorption process. Moreover, the effect of time, pH, ads...
متن کامل