Wood Machining Investigations: Parameters to Consider for Thorough Experimentation
نویسنده
چکیده
Investigators wanting to study aspects of wood machining face many challenges. The material under investigation is inherently different with respect to its three major axes, and it responds in various ways to local temperature, moisture, and many other variables. Researchers proposing future research projects in this area thus face a critically important task of selecting parameters to include either as variables or as quantities to hold constant. This editorial outlines key parameters and conditions of wood machining that can be considered, depending on the scope of a project.
منابع مشابه
An Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA
Electrical Discharge Machining (EDM) process is one of the most widely used methods for machining. This method is used to form parts that conduct electricity. This method of machining has used for hard materials and therefore selects the correct values of parameters which are so effective on the quality machining of parts. Reaching to optimum condition of the DIN1.2080 alloy (D3) machining is v...
متن کاملAn Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA
Electrical Discharge Machining (EDM) process is one of the most widely used methods for machining. This method is used to form parts that conduct electricity. This method of machining has used for hard materials and therefore selects the correct values of parameters which are so effective on the quality machining of parts. Reaching to optimum condition of the DIN1.2080 alloy (D3) machining is v...
متن کاملOptimization of Material Removal Rate in Electrical Discharge Machining Alloy on DIN1.2080 with the Neural Network and Genetic Algorithm
Electrical discharge machining process is one of the most Applicable methods in Non-traditional machining for Machining chip in Conduct electricity Piece that reaching to the Pieces that have good quality and high rate of machining chip is very important. Due to the rapid and widespread use of alloy DIN1.2080 in different industry such as Molding, lathe tools, reamer, broaching, cutting guillot...
متن کاملMulti-objective optimisation of die sinking electro discharge machining process using Taguchi
The objective of this paper is to determine the optimal setting of the process parameters on the electro-discharge machining (EDM) machine while machining AISI H13 tool steel. The parameters considered are pulse current, pulse-on-time, pulse-off-time and gap voltage ; whereas the responses are Tool wear ratio (TWR) and material removal rate (MRR). The optimal setting of the parameters are deter...
متن کاملA Methodology for Optimizing the Process of Machining a Workpiece Using Multi-Objective Particle Swarm Optimization
In this paper a methodology based on multi-objective particle swarm optimization algorithm, for identifying the optimal parameters for machining a workpiece with a milling is presented. The time for machining, the material removal rate, and the feed rate were identified as the objectives to optimize. In addition, the proposal considered 4 constraints related to cutting tools, rotating speed of ...
متن کامل