Surface modification of polycarbonate (bisphenol A) by low pressure rf plasma
نویسندگان
چکیده
Effects of low pressure radio frequency (rf) plasma treatment on the surface properties of polycarbonate are presented in this paper. Results obtained from the surface energy measurement after different conditions of treatment are compared. After treatment the surface free energy increased from the original value of 35 mJ/m2 to 63-74 mJ/m2. X-ray photoelectron spectroscopy measurements showed an increase in oxygen to carbon ratio after the treatment indicating an increase of oxygen-containing functional groups on the polycarbonate surface. A study of the stability of the modified surface property has been made on the basis of surface free energy. To study the improvement of adhesion between the polycarbonate and thin coatings, organosilicon thin films were deposited on the untreated and plasma treated polycarbonate. The adhesion of film to substrate was quantitatively analysed by ‘cross-hatch peel test’. ........................................................................................................................................................................................................................................................................................................................
منابع مشابه
Inactivation of Gram-Negative Bacteria by Low-Pressure RF Remote Plasma Excited in N2-O2 Mixture and SF6 Gases
The role of low-pressure RF plasma in the inactivation of Escherichia coli O157, Klebsiella pneumoniae, Proteus mirabilis, and Enterobacter sakazakii using N2-O2 and SF6 gases was assessed. 1×109 colony-forming units (CFUs) of each bacterial isolate were placed on three polymer foils. The effects of pressure, power, distance from the source, and exposure time to plasma gases were optimized. The...
متن کاملEffect of Using Cold Plasma Treatment on the Surface and Physicochemical Properties of Starch-chitosan Composite Film
Background and Objectives: Cold plasma is an eco-friendly and non-thermal technique, which has become an important technology to change the physical and chemical features of polymers. Recently, cold plasma has been considered in the decontamination and modification of packaging materials in the food industry. Therefore, the objective of this study was to survey the effect of using low-pressure ...
متن کاملPlasma can reduce Staphylococcus epidermidis biofilm formation on medical polymers
Medical polymers, such as urinary catheters are widely used biomaterials. One of the main problem for using the urinary catheters is biofilm formation on their surface, when they are used in a long time in the body. Virulence and pathogenicity of Staphylococcus epidermidis is often enhanced when growing as a biofilm. Many techniques have been presented to reduce the biofilm formation by surface...
متن کاملImprovement of gas separation properties of polyurethane membrane using plasma grafting
In recent years, plasma treatments have given good results since they offer high technological efficiency with low waste generation. One of the most important characteristics of plasma methods is their action only on a thin surface layer, whereas the bulk of sample remains unchanged and the modified material keeps its chemical and mechanical properties. In this research, polyurethane membrane s...
متن کاملMorphological, structural and photoresponse characterization of ZnO nanostructure films deposited on plasma etched silicon substrates
ZnO nanostructure films were deposited by radio frequency (RF) magnetron sputtering on etched silicon (100) substrates using dry Ar/SF6 plasma, at two etching times of 5 min and 30 min, and on non etched silicon surface. Energy dispersive X-ray (EDX) technique was employed to investigate the elements contents for etched substrates as well as ZnO films, where it is found to be stoichiometric. Su...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003