The Behaviour of Rollover Protective Structures subjected to Static and Dynamic Loading Conditions
نویسنده
چکیده
منابع مشابه
MULTI FRACTURE/DELAMINATION ANALYSIS OF COMPOSITES SUBJECTED TO IMPACT LOADINGS
A combined finite/ discrete element method is presented for modelling of composite specimens subjected to dynamic/impact loadings. The main task is set on developing an algorithm for simulation of potential bonding and debonding/delamination phenomena during impact or general dynamic loading conditions. In addition, full fracture analysis can also be performed. The proposed approach adopts a ge...
متن کاملارائه مدلی جهت بررسی رفتار انبساط استوانه جدار ضخیم تحت بارگذاری انفجاری داخلی
Evaluation of behaviour of thick-walled cylinders under high strain rate loading is of great importance because of their many applications. Most of the studies around these structures were performed in the state of static and quasi-static. Therefore, development of analytical model in structures loaded with high rates in dynamic state and in complete plastic domain is valuable. The main purpos...
متن کاملDetermination of Residual Stress for Single and Double Autofrettage of Thick-walled FG Cylinders Subjected to Dynamic Loading
In the present article a numerical procedure is developed for dynamic analysis of single and double autofrettage of thick–walled FG cylinders under transient loading. The governing differential equations are discretized and presented in explicit Lagrangian formalism. The explicit transient solution of discrete equations are obtained on the meshed region and results for stress and strain distrib...
متن کاملTOPOLOGY OPTIMIZATION OF STRUCTURES UNDER TRANSIENT LOADS
In this article, an efficient methodology is presented to optimize the topology of structural systems under transient loads. Equivalent static loads concept is used to deal with transient loads and to solve an alternate quasi-static optimization problem. The maximum strain energy of the structure under the transient load during the loading interval is used as objective function. The objective f...
متن کاملCrack Influences on the Static and Dynamic Characteristic of a Micro-Beam Subjected to Electro Statically Loading
In the present work the pull-in voltage of a micro cracked cantilever beam subjected to nonlinear electrostatic pressure was studied. Two mathematical models were employed for modeling the problem: a lumped mass model and a classical beam model. The effect of crack in the lumped mass model is the reduction of the effective stiffness of the beam and in the beam model; the crack is modeled as a m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009