Fluid Flow Control
نویسنده
چکیده
The fluid flow control systems can be classified depending on the type of pressure source, on the pipe system structure and on the control element. Depending on the pressure source type, the flow control systems can be equipped with centrifugal pumps or volumetric pumps. Concerning the pipe structure, the flow control systems can be used within the hydraulic systems with branches or without branches. The control element within the flow control systems can be the control valve or the assembly variable frequency drive – electric engine centrifugal pumps.
منابع مشابه
Numerical Study of Coupled Fluid Flow and Heat Transfer in a Rectangular Domain at Moderate Reynolds Numbers using the Control Volume Method
In this paper, we have used a control volume method to investigate the problem of a fully coupled fluid flow with heat transfer in a rectangular domain with slip wall boundary conditions. We have used this method to solve the governing equations and thereby to compute the convective and diffusive fluxes at the cell faces of the control volumes considered around the grid points of computational ...
متن کاملAn Experimental Study of Compound Control Method around a Cylinder
In this work, the compound flow control method (passive and active) has been described. EHD actuators as wire-plate (active) and splitter plate (passive) were coupled and applied to control fluid flow and heat transfer around cylinder in cross flow. Investigation consists of the interaction between electric field, fluid flow and temperature field. Experimental tests included various positions o...
متن کاملNumerical investigation on the effects of six control rods arranged in equilateral triangular configurations on fluid flow and forced convection heat transfer from a circular cylinder
The present work deals with heat transfer characteristics as well as fluid flow patterns in laminar flow regime for a circular cylinder with six control rods arranged in equilateral triangular geometries. The computations have been carried out by a finite volume approach using the overset grid method. The unsteady flow at Re= 200 and Pr= 0.7 and 7.0 was examined. The effect of the control rods ...
متن کاملAnalysis of Transient Flow in the Case of Secondary Injection for Transient Vector Control (RESEARCH NOTE)
The purpose of this paper is to analyze the flow field structure in transient state and performance of secondary injection system for thrust vectoring in divergent section of a two-dimensional nozzle. Secondary injection for thrust vectoring in a two-dimensional nozzle is studied by solving three-dimensional Reynolds-averaged equations by means of fluent solver. Spalart-allmaras model was used ...
متن کاملMeshless Local Petrov-Galerkin Method– Steady, Non-Isothermal Fluid Flow Applications
Abstract : The meshless local Petrov-Galerkin method with unity as the weighting function has been applied to the solution of the Navier-Stokes and energy equations. The Navier-Stokes equations in terms of the stream function and vorticity formulation together with the energy equation are solved for a driven cavity flow for moderate Reynolds numbers using different point distributions. The L2-...
متن کاملInvestigation of fluid flow and heat transfer in tube hot metal gas forming process
In this study, hot metal gas forming process of AA6063aluminumtubeis studied with a focus on heat transfer of both fluid and solid phases numerically. An experimental study is simultaneously conducted to validate the numerical method. Some of the most important outputs of the present study, are velocity distribution of fluid inside the tube as well as the fluid in the gap between tube and matri...
متن کامل