N-Type Boron-Carbide Semiconductor Polytype and Method of Fabricating the Same
نویسندگان
چکیده
منابع مشابه
The incorporation of Nickel and Phosphorus dopants into Boron-Carbon alloy thin films
The structural and electronic properties of nickeland phosphorus-doped boron–carbon (B5C) alloy thin films grown by plasma-enhanced chemical vapor deposition have been examined. The Ni-doped boron–carbon alloys were grown using closo-1,2-dicarbadodecaborane (C2B10H12) as the boron–carbon source compound and nickelocene (Ni(C5H5)2) as the nickel source. The phosphorus-doped alloys were grown usi...
متن کاملEnhanced Characteristics of Square-Shaped Extended Source TFET Via Silicon Carbide Polytype (3C-SiC) and a Dopant Pocket Layer
In this paper, for the first time, the square-shaped extended source tunneling field-effect transistor (SES TFET) by means of the silicon carbide polytype (3C-SiC) and dopant pocket layer has been presented. By inserting the silicon carbide polytype as substrate and n-type pocket in the channel at the source edge, on-current is increased by about 10 times compared with the conventional SES TFET...
متن کاملMesoscale Modeling of Dynamic Compression of Boron Carbide Polycrystals
An anisotropic nonlinear elastic model is advanced for crystals belonging to either of two polytypes of boron carbide ceramic. Crystals undergo transformation to an isotropic, amorphous phase upon attainment of a local state-based criterion associated with a loss of intrinsic stability. The model is implemented using the dynamic finite element method, and is demonstrated on a representative vol...
متن کاملBehavior of disordered boron carbide under stress.
Gibbs free-energy calculations based on density functional theory have been used to determine the possible source of failure of boron carbide just above the Hugoniot elastic limit (HEL). A range of B4C polytypes is found to be stable at room pressure. The energetic barrier for shock amorphization of boron carbide is by far the lowest for the B12(CCC) polytype, requiring only 6 GPa approximately...
متن کاملStabilization of boron carbide via silicon doping.
Boron carbide is one of the lightest and hardest ceramics, but its applications are limited by its poor stability against a partial phase separation into separate boron and carbon. Phase separation is observed under high non-hydrostatic stress (both static and dynamic), resulting in amorphization. The phase separation is thought to occur in just one of the many naturally occurring polytypes in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017