Investigation of Noise, Durability, Permeability, and Friction Performance Trends for Asphaltic Pavement Surface Types: First- and Second-Year Results

نویسندگان

  • John T. Harvey
  • Erwin Kohler
  • Qing Lu
چکیده

The central purpose of the research is to support the California Department of Transportation (Caltrans) Quieter Pavement Research Program, which has as its goals and objectives the identification of quieter, safer asphalt pavement surfaces. The research conforms with Federal Highway Administration (FHWA) guidance provided to state departments of transportation (DOTs) that conduct tire/pavement noise research. Results from this research are intended to identify best practices for selecting asphaltic surfaces based on performance trends identified from field measurements for noise, permeability, friction, and durability. This report evaluates the first two years of measurements of noise (on-board sound intensity), permeability, skid resistance (friction), roughness, and surface distresses of the most common asphalt pavement surface types in California: open-graded asphalt concrete, which includes conventional mixes (OGAC), rubberized mixes (RAC-O), and F-mixes; rubberized gap-graded asphalt concrete (RAC-G); and dense-graded asphalt concrete (DGAC). The sample of pavement surfaces in this study includes three age categories, two traffic types, and two rainfall regions. This report presents results for the sections in the factorial experiment in the detailed Work Plan for this project. This report also presents similar results for the Division of Environmental Analysis sections and other special test sections, which are referred to as ES sections. This report presents all results for the factorial sections and ES sections, some of which were presented in previous interim reports. Conclusions are made regarding the performance of open-graded mixes and RAC-G compared with DGAC; the variables affecting tire/pavement noise; the correlation of laboratory absorption values with field-measured noise levels; and the performance of mix types included in the study in addition to DGAC, OGAC, RAC-O, and RAC-G. Preliminary recommendations are made for practice based on the results, and recommendations are made for future work.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Permeability, and Friction Performance Trends for Asphalt Pavement Surface Types: First- and Second-Year Results

This report summarizes a detailed report presenting the first and second year of field and laboratory measurements and statistical analyses and performance estimates for tire/pavement noise, permeability, ride quality, distress development, and friction properties of four types of asphalt pavement surface types used by the California Department of Transportation: open-graded asphalt concrete (O...

متن کامل

Laboratory Evaluation of the Noise and Durability Properties of Asphalt Surface Mixes

This study made comparisons of the expected noise and durability performance of asphalt surface mixes based on laboratory testing only, and recommended a set of surface mixes for field test sections with improved surface performance properties. The study included a series of experiments to investigate the effects of several important mix variables identified in studies of field test sections, i...

متن کامل

Investigating the Performance of Cracked Asphalt Pavement Using Finite Elements Analysis

Occurrence of top down and bottom up fatigue cracking in asphaltic pavements is common. Conventional pavement analysis methods ignore the existence of cracks in asphaltic layers. However, it seems that the responses of cracked pavement would not be the same as a pavement without crack. This paper describes effects of crack type, position and length, and vehicles tire inflation pressure and axle...

متن کامل

The Influence of Graphene Oxide on Mechanical Properties and Durability Increase of Concrete Pavement

Herein, the performance of graphene oxide (GO) in improving mechanical properties and subsequently reducing the permeability of cement composites used in concrete pavement, is studied. A polycarboxylate superplasticizer was used to improve the dispersion of GO flakes in the cement. The mechanical strength of graphene-cement nanocomposites containing 0.1–2 wt% GO and 0.5 wt% superplasticizer was...

متن کامل

Influences of Surface Characteristics and Modified Asphalt Binders on Interface Shear Strength

Weak bonding between layers of pavement leads to damages on the composite pavement. Bonding plays an important role in the durability and maintenance of composite pavement layers. The present study evaluates the factors effective in bond strength of the interface between concrete and asphalt pavements. The factors considered for this purpose include steel slag percentage in the concrete pavemen...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008