Case Study: Temperature Control of Hot Rolling Steel
نویسنده
چکیده
In this case study we discuss a simple control system used for obtaining a desirable downstream surface temperature inside a hot rolling steel sheet, presented by Bao Steel in the HK Study Group with Industry, held at the City University of Hong Kong, July 2002.
منابع مشابه
Significance of Heat Conduction Parameter along the Rolling Direction in the Thermal Modeling of the Hot Rolling Process
Obtaining temperature distribution data of slabs under rolling is essential as the mechanical and metallurgical properties of the metal under this process vary with temperature. Using the control volume method, a mathematical model is employed in this study to predict slab temperature in the hot roll process at Mobarakeh Steel Company. The effects of different parameters including the heat resu...
متن کاملHot-charging sequence critical analysis for steel bar plant for Pollution control and Energy Optimization -A case study
Temperature is the main process variable needed for every operation in hot rolling process for all value addition activity and can be considered as main variable also to control pollution.. It is a tool for the steel hot rolling plant to improve profitability, environment and productivity by controlling the process energy balance by its sequences optimization. In the steel rolling plant the imp...
متن کاملSimulation of Temperature Distribution in Hot Strip over Transfer Table
Transfer table is an essential stage between roughing and finishing rolling stands in a hot-strip rolling mill. High temperature and long time that strip is exposed to air at this stage cause a considerable heat loss that accounts for uneven temperature distribution, non-uniform surfaces, reduced product quality and increased production costs. Using thermal shields on the transfer table is cons...
متن کاملPrediction of Work-Piece Constitutive Equation in Hot Rolling of Strip
Dimensional control of the work-piece in steel industry is of important interest. The main aspects in overcoming the thickness control are variations in material strength due to variations in chemical composition, work-piece temperature, reduction and the strain rate applied to the work-piece. In this paper based on the main parameters affecting the rolling force an attempt been made to give a ...
متن کاملEffect of Composition on the Recrystallization Behavior of if Steels During Simulated Hot Strip Rolling
Flow curves are generated in muti-pass torsion tests for a titanium stabilized and a niobium stabilized IF steel. Two types of test schedule are used, one based on plate rolling and the other approximating strip rolling. The purpose of the former is to define the three critical temperatures of steel rolling. The strip schedules are varied in order to investigate the influence of increasing the ...
متن کامل