Comparison between thick level set (TLS) and cohesive zone models
نویسندگان
چکیده
© The Author(s) 2017. This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
منابع مشابه
Simulation of the Mode I fracture of concrete beam with cohesive models
Crack propagation modeling in quasi-brittle materials such as concrete is essential for improving the reliability and load-bearing capacity assessment. Crack propagation explains many failure characteristics of concrete structures using the fracture mechanics approach. This approach could better explain the softening behavior of concrete structures. A great effort has been made in developing nu...
متن کاملA Cohesive Zone Model for Crack Growth Simulation in AISI 304 Steel
Stable ductile crack growth in 3 mm thick AISI 304 stainless steel specimens has been investigated experimentally and numerically. Multi-linear Isotropic Hardening method coupled with the Von-Mises yield criterion was adopted for modeling elasto-plastic behavior of the material. Mode-I CT fracture specimens have been tested to generate experimental load-displacement-crack growth data during sta...
متن کاملQuasi-explicit time-integration schemes for dynamic fracture with set-valued cohesive zone models
We investigate quasi-explicit time-integration schemes for solving dynamic fracture problems with set-valued cohesive zone models. These schemes combine a central difference time-integration scheme and a partially implicit and lumped treatment of the cohesive forces. At each time step, the displacements of the nodes in the interior of the domain are computed in an explicit way, while the displa...
متن کاملMixed-mode Cohesive-zone Models for Delamination and Deflection in Composites
Cohesive-zone models for interfaces incorporate both strength and energy parameters. Therefore, they provide a natural bridge between strength-based models and energy-based models for fracture, allowing delamination to be described by a single framework that covers a range of applications for which the strength or energy criteria alone might not be sufficient. In this paper, the relationships b...
متن کاملبررسی عددی رفتار ورقهای کامپوزیتی چندلایه فلز- الیاف تحت ضربه کم سرعت
In this article, low velocity impact behavior of fiber metal laminate (FML) composite plates is investigated under three different impact energies (12.7 J, 16.3 J and 24.2 J). Here, three modeling techniques are used. In one of the models the inter-laminar damage is neglected (model without delamination) and in other two models this damage is simulated using cohesive element and cohesive surfac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Adv. Model. and Simul. in Eng. Sciences
دوره 4 شماره
صفحات -
تاریخ انتشار 2015