Calculation of delivery rate in fault-tolerant network-on-chips
نویسندگان
چکیده
Techset Com Reliability for network-on-chips has been widely researched in last decades not only to support the rapid growing requirement of onchip communication but also to address the challenge on reliability due to aggressive technology scaling. Simulation is the most common method to evaluate the capacity of reliability design but its cost is significant. Therefore, it is necessary to calculate the capacity for reliability of a design with light-weight mathematic models. A model for faults on links is described to calculate the delivery rate of networks based on a Markov chain fault model, fault-tolerant configuration and network traffic. The calculation results show accurate approximation of simulation results.
منابع مشابه
CAFT: Cost-aware and Fault-tolerant routing algorithm in 2D mesh Network-on-Chip
By increasing, the complexity of chips and the need to integrating more components into a chip has made network –on- chip known as an important infrastructure for network communications on the system, and is a good alternative to traditional ways and using the bus. By increasing the density of chips, the possibility of failure in the chip network increases and providing correction and fault tol...
متن کاملComparative Analysis of Transient-Fault Tolerant Schemes for Network on Chips
Network on a chip (NoC) has been proposed as a viable solution to counter the inefficiency of buses in the current VLSI on-chip interconnects. However, as the silicon chip accommodates more transistors, the probability of transient faults is increasing, making fault tolerance a key concern in scaling chips. In packet based communication on a chip, transient failures can corrupt the data packet ...
متن کاملA generalized ABFT technique using a fault tolerant neural network
In this paper we first show that standard BP algorithm cannot yeild to a uniform information distribution over the neural network architecture. A measure of sensitivity is defined to evaluate fault tolerance of neural network and then we show that the sensitivity of a link is closely related to the amount of information passes through it. Based on this assumption, we prove that the distribu...
متن کاملReliability and Performance Evaluation of Fault-aware Routing Methods for Network-on-Chip Architectures (RESEARCH NOTE)
Nowadays, faults and failures are increasing especially in complex systems such as Network-on-Chip (NoC) based Systems-on-a-Chip due to the increasing susceptibility and decreasing feature sizes. On the other hand, fault-tolerant routing algorithms have an evident effect on tolerating permanent faults and improving the reliability of a Network-on-Chip based system. This paper presents reliabili...
متن کاملA Fault Tolerant Algorithms for the Minimization of Blocking Probability in Optical Burst Switching Network
One of the major concerns in the field of computer Network is how to Transfer large amount of data and Transfer that data without any congestion or faults. Optical Burst Switching networks are used today for the huge transfer of data. So, Fault Tolerance is an important Issue in the Optical burst switching network. Fault tolerant refers to the ability of the network to transfer the information ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016