Synthesis Circuit Correction for Speed Sensors of Physical Quantities and Current-Voltage Converters with Parasitic Capacitance
نویسنده
چکیده
The paper presents the method of increasing the speed of sensors with high output resistance, for example, photodiode of optical systems for transmitting digital information. The features of method of correcting circuit of current-voltage converters, which compensate the influence of parasitic capacitance of sensor on its bandwidth and the settling time of the transient process are considered.
منابع مشابه
A Class E Power Amplifier with Low Voltage Stress
A new output structure for class E power amplifier (PA) is proposed in this paper. A series LC resonator circuit, tuned near the second harmonic of the operating frequency is added to the output circuit. This resonator causes low impedance at the second harmonic. The output circuit is designed to shape the switch voltage of the class E amplifier and lower the voltage stress of the transistor. T...
متن کاملAn integrated interface circuit with a capacitance-to-voltage converter as front-end for grounded capacitive sensors
This paper presents the analysis and design of an integrated interface for grounded capacitive sensors. To reduce the effects of parasitic cable capacitances, a feedforward technique has been applied. In combination with the use of a special front-end amplifier this yields high immunity for a parasitic cable capacitance. The major nonidealities of the interface circuit have been analyzed. The c...
متن کاملAnalysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype
One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...
متن کاملAnalysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype
One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...
متن کاملA Low Cost Sensorless Control Drive Circuit for of Low Voltage Switched Reluctance Motor
Shaft position sensing is an essential part of switched reluctance (SR) motor drive In order to synchronize the pulses of phase current with the period of rising inductance of the proper motor phase. Direct sensors such as, Hall effect and optical encoder are commonly used in SR motors. The purpose of this paper is to present an indirect shaft positioning sensing known as "sensorless " control ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014