Studies on Multi-Agent Based Partial Discharge Online Monitoring System for High Voltage Apparatus
نویسندگان
چکیده
In the contribution, the authors applied the Multi-Agent methodology to the partial discharge (PD) online diagnosis for high voltage apparatus, and a PD diagnosis Multi-Agent system for high voltage apparaus was implemented. Based on the investigation of problems existing in partial discharge detection and evaluation, such as preprocessing, features extraction, trend and fingerprint analysis, corresponding methods and schemes were described. The framework of the Multi-Agent system and detailed design of each agent were also depicted. And furthermore, a complete system implemented by Zeus are established for performing evaluation in field application. Key-Words: High voltage, Partial discharge, Multi-Agent, Monitoring, .Net Framework, Zeus
منابع مشابه
Analysis and Diagnosis of Partial Discharge of Power Capacitors Using Extension Neural Network Algorithm and Synchronous Detection Based Chaos Theory
Power capacitors are important equipment of the power systems that are being operated in high voltage levels at high temperatures for long periods. As time goes on, their insulation fracture rate increases, and partial discharge is the most important cause of their fracture. Therefore, fast and accurate methods have great importance to accurately diagnosis the partial discharge. Conventional me...
متن کاملOnline Voltage Stability Monitoring and Prediction by Using Support Vector Machine Considering Overcurrent Protection for Transmission Lines
In this paper, a novel method is proposed to monitor the power system voltage stability using Support Vector Machine (SVM) by implementing real-time data received from the Wide Area Measurement System (WAMS). In this study, the effects of the protection schemes on the voltage magnitude of the buses are considered while they have not been investigated in previous researches. Considering overcurr...
متن کاملDSP Based On-line Partial Discharge Monitoring System for High Voltage Power Cable
In high voltage power cable system, partial discharge (PD) is a common phenomenon which reflects the degradation of insulation. When partial discharge happens inside the cable, leakage current will flow through the grounded conductor. To couple the partial discharge current, one feasible and effective method is placing a clamp-on high frequency current transformer around the grounded strap. In ...
متن کاملAutomatic Partial Discharge Pattern Recognition for Use in On-line Cable Condition Monitoring Systems
For a growing number of utilities partial discharge (PD) based on-line condition monitoring systems are being used for Medium Voltage cables. Signal processing, including data denoising and feature extraction, is fundamental to obtaining useful data from the noisy raw signals. Because raw data in an on-line monitoring system emerges on a continuous basis, the ability to turn raw data into usefu...
متن کاملA novel calibration method for PD measurements in power cables and joints using capacitive couplers
Partial discharge (PD) measurements are universally accepted as a technique giving some indication of the state of the insulation in high-voltage apparatus. Cable end users are keen to adopt online PD monitoring during commissioning of systems. However, because of noisy environments and the problems of interference the conventional methods are difficult to implement. As a consequence, ultra-hig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009