Amorphous to Tetragonal Zirconia Nanostructures and Evolution of Valence and Core Regions

نویسندگان

  • Sesha Vempati
  • Fatma Kayaci-Senirmak
  • Cagla Ozgit-Akgun
  • Necmi Biyikli
  • Tamer Uyar
چکیده

In this report, we study the evolution of valence band (VB) structure during a controlled amorphous to tetragonal transformation of ZrO2 core−shell nanostructures fabricated from electrospun nanofiber template (at 130, 200, and 250 °C). Shell-ZrO2 was formed with atomic layer deposition. X-ray diffraction and transmission electron microscopy are employed to unveil the transformation of amorphous to crystalline structure of ZrO2. O 1s core-level spectra indicated chemisorbed oxygen (OCh) of almost invariant fraction for the three samples. Zr 3s level suggested that the sample deposited at 130 °C has depicted a peak at relatively higher binding energy. Analyses on Zr 3d spectra indicated the presence of metallic-Zr (Zr, 0 ≤ |ζ| < 4), the fraction of which decreases with increasing template temperature. VB region is analyzed until ∼64 eV below the Fermi level (EF). The region close to EF depicted features that are dissimilar to the literature. This discrepancy is explained on the basis of the analyses from O 1s, Zr 3d, and Zr 4p levels including hybridization of orbitals from chemisorbed species. These levels were analyzed in terms of peak characteristics such as spectral position, area under the peak, etc. The results of this study would enhance the understanding of the evolution of various bands in the presence of OCh and changes to the crystallinity enabling the functionalities that are not available in the single-phase ZrO2.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms

This work is focused on the effect of amorphous SiO2 addition on the phase transformation and microstructural evolution of ZrO2 particles. Considering the structural similarities between the amorphous ZrO2 and its tetragonal structure, XRD results showed initial nucleation of metastable tetragonal ZrO2 from its amorphous matrix upon heat treatment. This metastable phase is unstable in pure ZrO2...

متن کامل

کلراسیون زیرکونیای آسیابکاری شده

The effects of mechanochemical treatment of monoclinic zirconia in high energy planetary ball mill on its phase transformation were investigated. The mechanical treatment in ball mill reduces the grain size, increases microstrain, and causes phase transition to metastable nanostructured tetragonal and cubic phases. XRD and TEM results show considerable amounts of amorphous phase during ball mil...

متن کامل

Effect of Crystalline Size on the Structure of Copper Doped Zirconia Nanopaticles Synthesized via Sol-Gel

The stabilized zirconia with different Cu contents synthesized via sol- gel method. The samples were prepared by hydrolysis and condensation of orgnomatelic sol. After that the result gels were dried at 80 °C and then calcined at various temperatures.  ِ The differential thermal analysis (DTA), X-ray diffraction (XRD), field emission scanning electronic microscopy (FESEM) and transmission el...

متن کامل

تاثیر آسیاب کاری پر انرژی روی دمای تشکیل فازهای محصول در سیستم آلومینیم-آلومینا-زیرکن

A powder mixtures of 18.72% wt, 17.67% wt Al2O3 and 63.6% wt zircon were prepared and milled in a planetary ball milled for one up to 10 hours in presence of air. After removal Iron impurity from as-milled samples, they were isothermally heated in temperature range of 1300-1450 0C for one hour in an air atmosphere. After cooling the samples, they were studied using XRD analyses. The XRD and PSA...

متن کامل

Growth of nanolaminate structure of tetragonal zirconia by pulsed laser deposition

Alumina/zirconia (Al2O3/ZrO2) multilayer thin films were deposited on Si (100) substrates at an optimized oxygen partial pressure of 3 Pa at room temperature by pulsed laser deposition. The Al2O3/ZrO2 multilayers of 10:10, 5:10, 5:5, and 4:4 nm with 40 bilayers were deposited alternately in order to stabilize a high-temperature phase of zirconia at room temperature. All these films were charact...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015