An efficient 3C-silicon carbide/titania nanocomposite photoelectrode for dye-sensitized solar cell.

نویسندگان

  • Yan-Chou Lai
  • Yu-Chen Tsai
چکیده

Dye-sensitized solar cells (DSSCs) are fabricated using a novel 3C-SiC/TiO(2) nanocomposite as a photoelectrode to enhance the power conversion efficiency. Compared with a pristine nanocrystalline TiO(2) cell, a DSSC based on a 3C-SiC (0.04 wt%)/TiO(2) nanocomposite photoelectrode shows ~115% increase in power conversion efficiency.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of nanostructured TiO2 film thickness on photoelectrode structure and performance of flexible Dye- Sensitized Solar Cells

A  commercial  Ti-Nanoxide  was  deposited  on  In-doped  SnO2 (ITO) polymer  substrates by  tape casting  technique with different thicknesses  (7,  14  and  36μm)  to  be  used  as  photoelectrode  in flexible  dye-sensitized  solar  cells  (DSSCs).  Ruthenium  dye  was adsorbed on each TiO2 film for 24 h. The resulting photoelectrodes were used to form flexible DSSCs in combination with...

متن کامل

Formation of N719 dye multilayers on dye sensitized solar cell photoelectrode surfaces investigated by direct determination of element concentration depth profiles.

The structure of the dye layer adsorbed on the titania substrate in a dye-sensitized solar cell is of fundamental importance for the function of the cell, since it strongly influences the injection of photoelectrons from the excited dye molecules into the titania substrate. The adsorption isotherms of the N719 ruthenium-based dye were determined both with a direct method using the depth profili...

متن کامل

3-D TiO2 nanoparticle/ITO nanowire nanocomposite antenna for efficient charge collection in solid state dye-sensitized solar cells.

TiO2 nanoparticle (NP)/ITO nanowire (NW) nanocomposites for use as photoelectrode materials were fabricated to improve the charge collection efficiency in solid state dye sensitized solar cells (ss-DSSCs). The average current density for ss-DSSCs containing TiO2 NP/ITO NW arrays was 7.2 mA cm(-2) that was 98% higher than that for the conventional TiO2 NP ss-DSSCs. The intensity modulated photoc...

متن کامل

Light scattering with oxide nanocrystallite aggregates for dye- sensitized solar cell application

Oxide nanocrystallite aggregates are candidates for use in dye-sensitized solar cells. The aggregates are of submicron size, formed by nano-sized crystallites and, therefore, able to offer both a large specific surface area and desirable size comparable to the wavelength of light. While used for a photoelectrode in a dye-sensitized solar cell, the aggregates can be designed to generate effectiv...

متن کامل

Applications of light scattering in dye-sensitized solar cells.

Light scattering is a method that has been employed in dye-sensitized solar cells for optical absorption enhancement. In conventional dye-sensitized solar cells, large TiO(2) particles with sizes comparable to the wavelength of visible light are used as scatterers by either being mixed into the nanocrystalline film to generate light scattering or forming a scattering layer on the top of the nan...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Chemical communications

دوره 48 53  شماره 

صفحات  -

تاریخ انتشار 2012