Valve-pump parallel control of hydraulic motor speed servos with large power
نویسندگان
چکیده
This study proposes both replenishing type and leaking type valve-pump parallel controlled systems, and then establishes their mathematical principle models and simulated numerical models. Comparative analysis of performances and parameters of the pump controlled system and valve-pump parallel controlled system indicate that the proposed systems can respond faster with high efficiency than the pump controlled systems, just because the valve responds more rapidly than the variable pump and works at low flow status; total leakage coefficients and damping ratios of the proposed system are large and vary widely with the valve opening and load pressure. When suffering disturbance of variable loads, the replenishing type system has more stable damping ratios and speed stiffness compared with the leaking type system. In addition, it can further improve response and speed stiffness by raising the supply pressure of the controlled valve, while the leaking type system does not have this flexibility. Therefore, the replenishing type valve-pump parallel control is more suitable for hydraulic speed servo systems with large power to achieve rapid response and good speed stiffness with high efficiency.
منابع مشابه
Analysis of Steady State Performance of an Open Loop Drive of a Hydraulic Motor used in Hydrostatic Transmission System
The speed and torque of the hydraulic motor is controlled by controlling the hydraulic valve pump connected to the hydraulic motor. An electro hydraulic valve coupled to a hydraulic motor is a common method of motor speed control in practice where both load pressure and speed change during operation. In this paper, system equations that include, flow and toque loss term has been established by ...
متن کاملEngineering Studies of The Control Structure of Electro-Hydraulic Pumps And Variable Axial Pistons
Pumps are often used in both industrial applications and mobile hydraulic machinery. In variable displacement pumps, the flow rate is dictated by the system requirements. The electro-hydraulic pump is a new integrated product, which comprise the combination of a pump and motor as a unit replacing the traditional connection with a shaft coupling. The pump is actuated without a rotating shaft uti...
متن کاملThe Force Control of a Novel Variable Rotational Speed Hydraulic Pump-Controlled System Using Adaptive Fuzzy Controller with Self-Tuning Fuzzy Sliding-Mode Compensation
The conventional hydraulic valve-controlled systems have high response but low energyefficiency. Hydraulic pump-controlled servo systems have high energy efficiency. However, the conventional pump-controlled systems, which are altered by displacement via variable displacement pumps, have lower response. This paper aims to investigate the force control performance of the high response electro-hy...
متن کاملHybrid Excavator Power System Controller Design Based on Fuzzy Control
Controller of hybrid excavator power system was designed with control target was to improve diesel engine fuel efficiency and decrease shaft rotate speed fluctuation. Controller input parameters were set as hydraulic pump required torque, hydraulic pump rotate speed and battery SOC. Controller output parameters were set as diesel engine output torque and motor torque. Diesel engine output torqu...
متن کاملDesign of Intelligent Hydraulic Excavator Control System Based on PID Method
Most of the domestic designed hydraulic excavators adopt the constant power design method and set 85%~90% of engine power as the hydraulic system adoption power, it causes high energy loss due to mismatching of power between the engine and the pump. While the variation of the rotational speed of engine could sense the power shift of the load, it provides a new method to adjust the power matchin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IJMIC
دوره 21 شماره
صفحات -
تاریخ انتشار 2014