High Bi content GaSbBi alloys
نویسندگان
چکیده
Copyright and reuse: The Warwick Research Archive Portal (WRAP) makes this work of researchers of the University of Warwick available open access under the following conditions. This article is made available under the Creative Commons Attribution 3.0 (CC BY 3.0) license and may be reused according to the conditions of the license. For more details A note on versions: The version presented in WRAP is the published version, or, version of record, and may be cited as it appears here.
منابع مشابه
Bi flux-dependent MBE growth of GaSbBi alloys
The incorporation of Bi in GaSb1 xBix alloys grown by molecular beam epitaxy is investigated as a function of Bi flux at fixed growth temperature (275 1C) and growth rate ð1 μm h Þ. The Bi content is found to vary proportionally with Bi flux with Bi contents, as measured by Rutherford backscattering, in the range 0oxr4:5%. The GaSbBi samples grown at the lowest Bi fluxes have smooth surfaces fr...
متن کاملSb-Bi Alloys and Ag-Cu-Pb-Sb-Bi Sulphosalts in the Jialong Cu-Sn Deposit in North Guangxi, South China
Although native bismuth is a relatively common mineral, native antimony is less abundant, and Sb-Bi alloys are relatively rare phases in Nature. Sb-Bi alloys and Ag-Cu-Pb-Sb-Bi sulphosalts have been discovered in the Jialong vein-type Cu-Sn deposit in North Guangxi, South China. The Jialong deposit is hosted by schist within the contact zone of a Neoproterozoic granite. Four stages of ore forma...
متن کاملHigh-Reliability Low-Ag-Content Sn-Ag-Cu Solder Joints for Electronics Applications
Sn-Ag-Cu (SAC) alloy is currently recognized as the standard lead-free solder alloy for packaging of interconnects in the electronics industry, and highAg-content SAC alloys are the most popular choice. However, this choice has been encumbered by the fragility of the solder joints that has been observed in drop testing as well as the high cost of the Ag itself. Therefore, low-Ag-content SAC all...
متن کاملLow-Cycle Fatigue Characteristics of Sn-Based Solder Joints
Low-cycle, lap-shear fatigue behavior of Sn-based, Pb-free solder alloys, Sn3.5Ag, Sn-3.5Ag-Cu, Sn-3.5Ag-Bi, and Sn-0.7Cu, were studied at room temperature using specimens with printed circuit board (PCB)/solder/PCB structure under total displacement of ±10 μm, 12 μm, 15 μm, and 20 μm. The fatigue lives of various solder joint materials, defined as 50% load drop, were correlated with the fractu...
متن کاملA chemical solution route to rapid synthesis of homogeneous Bi(100-x)Sb(x) alloys nanoparticles at room temperature.
A chemical co-reduction route in aqueous solution was developed to synthesize Bi(100-x)Sb(x) alloys at room temperature. The hydrolyses of Bi(III) and Sb(III) were effectively avoided by selecting proper raw materials and coordinator. X-ray diffraction analysis indicated that the as-prepared Bi(100-x)Sb(x) alloys were homogeneous and phase-pure, and the Bi/Sb ratios in the alloys were very clos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015