Overall Model of Plasticity and Failure of Metals
نویسنده
چکیده
Plastic flow evolution was investigated for various metals and alloys, which differed in chemical bond and crystal lattice type (BCC/FCC/HCP), structural state (single-crystal/polycrystalline) and deformation mechanisms (dislocation glide/twinning). On the base of conclusive evidence it is attempted to explain the phenomenon of plastic flow localization by invoking a fundamental principle of quantum mechanics.
منابع مشابه
Comparison of two integration schemes for a micropolar plasticity model
Micropolar plasticity provides the capability to carry out post-failure simulations of geo-structures due to microstructural considerations and embedded length scale in its formulation. An essential part of the numerical implementation of a micropolar plasticity model is the integration of the rate constitutive equations. Efficiency and robustness of the implementation hinge on the type of int...
متن کاملFEM Implementation of the Coupled Elastoplastic/Damage Model: Failure Prediction of Fiber Reinforced Polymers (FRPs) Composites
The coupled damage/plasticity model for meso-level which is ply-level in case of Uni-Directional (UD) Fiber Reinforced Polymers (FRPs) is implemented. The mathematical formulations, particularly the plasticity part, are discussed in a comprehensive manner. The plastic potential is defined in effective stress space and the damage evolution is based on the theory of irreversible thermodynamics. T...
متن کاملA Sub Loading Surface Multilaminate Model for Elastic-Plastic Porous Media
A framework for development of constitutive models based on semi-micromechanical aspects of plasticity is proposed. The resulting of this model for material employed friction type failure criterion, sub-loading surface, and associated flow rule. This model is capable of predicting effects of the rotation of principal stress/strain axes and consequent plastic flow, induced anisotropy of strength...
متن کاملA Strain Range Dependent Cyclic Plasticity Model
Hysteresis loop curves are highly important for numerical simulations of materials deformation under cyclic loadings. The models mainly take account of only the tensile half of the stabilized cycle in hysteresis loop for identification of the constants which don’t vary with accumulation of plastic strain and strain range of the hysteresis loop. This approach may be quite erroneous particularly ...
متن کاملModeling grain size dependent optimal twin spacing for achieving ultimate high strength and related high ductility in nanotwinned metals
We have developed a mechanism-based plasticity model of nanotwinned metals to investigate the effect of twin spacing on strength, ductility and work hardening rate of such materials. In particular, the unique roles of dislocation pile-up zones near twin and grain boundaries, as well as twinning partial dislocations, in strengthening and work hardening are incorporated in the model. Competition ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011