AN1960 Using the MCP16311/2 Synchronous Buck Converter Design Analyzer
ثبت نشده
چکیده
In order to help engineers cope with the complexity of developing the power supplies best suitable for their design, IC manufacturers are providing power supply design tools, such as the Microchip Technology Incorporated MCP16311/2 Design Analyzer. This tool represents a superior alternative to the trial-and-error approach, which is both time and resource consuming as it involves repeatedly developing and testing prototypes until satisfactory results are obtained.
منابع مشابه
Digital Controller Designbased on Time Domain for DC-DC Buck Converter
In this paper, the digital controller design for compensating the dc-dc buck converter output voltage has been analyzed in the digital domain. The main idea of this paper is patterning the samples of high order ideal controller and using integral square error in determining digital PID coefficients. This approach provides higher precision of digital controller design and eliminates the need for...
متن کاملA High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications
This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...
متن کاملAnalysis and Design of a New Single Switch Non-Isolated Buck-Boost dc-dc Converter
In this paper, a new transformerless buck-boost converter based on ZETA converter is introduced. The proposed converter has the ZETA converter advantages such as, buck-boost capability and input to output DC insulation. The suggested converter voltage gain is higher than the classic ZETA converter. In the presented converter, only one main switch is utilized. The proposed converter offers low v...
متن کاملA Buck-Boost Converter; Design, Analysis and Implementation Suggested for Renewable Energy Systems
This work introduces a new non-isolated buck-boost DC-DC converter. Interleaved configuration of the suggested structure increases the voltage conversion ratio. The voltage rate of the suggested converter can be stepped-up and stepped down for lower values of duty-cycle, which causes to decrease in the conduction losses of the system. The voltage conversion ratio of the recommended structure is...
متن کاملPV Charger System Using A Synchronous Buck Converter
The paper describes the design, simulation and practical implementation of a PV system specifically designed for battery charging applications. A DC-DC synchronous Buck converter is digitally controlled by a dsPIC33F to extract the maximum power from the PV panel and feed it to the battery, according to the data received through the sensors. The system proves to be stable to rapid weather chang...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015