The effects of adding the aluminum sulfate to the urea formaldehyde adhesive applied on plywood
نویسندگان
چکیده
1 Department of Furniture and Decoration Education, Dumlupinar University, 43500 Simav-Kutahya, Turkey. 2 Department of Furniture and Decoration, Giresun University, Giresun Vocational School, 28048, Giresun-Turkey. 3 Department of Furniture and Decoration, Artvin Coruh University, Artvin Vocational School, 08000, Artvin-Turkey. 4 Department of Forest Industrial Engineering, Artvin Coruh University, 08000, Artvin-Turkey.
منابع مشابه
Some Mechanical Properties of Plywood Produced from Eucalyptus, Beech, and Poplar Veneer
In this study, we determined the flexural properties and tensile shear strength of five-ply plywood panels produced with eucalyptus (Eucalyptus grandis), beech (Fagus orientalis), and hybrid poplar (Populus x euramericana) using urea-formaldehyde (UF), melamine-urea-formaldehyde (MUF) and phenol-formaldehyde (PF) adhesives. Flexural properties were tested on both parallel and perpendicular to g...
متن کاملEffect of Nanoclay-treated Uf Resin on the Physical and Mechanical Properties of Plywood Manufactured with Wood from Tropical Fast Growth Plantations
Physical and mechanical properties were evaluated on cross-laminated panels (plywood) fabricated with three plantation species (Cordia alliodora, Gmelina arborea and Vochysia ferruginea) from tropical climates in Costa Rica. The panels were glued with urea-formaldehyde resin modified with nanoclay at four concentrations (0,75; 1,00; 1,50 and 2,00 %) and unmodified resin. It was determined that ...
متن کاملA New Flexible Soy-Based Adhesive Enhanced with Neopentyl Glycol Diglycidyl Ether: Properties and Application
Soy-based adhesives inherently possess low water resistance and brittleness, which limit their application on plywood fabrication. This investigation involves using a long chain cross-linker, neopentyl glycol diglycidyl ether (NGDE), to produce an intrinsic toughening effect to reduce the brittleness and improve the water resistance of a soybean meal–based adhesive. The solids content, viscosit...
متن کاملThe Effects of Sealing Treatment and Wood Species on Formaldehyde Emission of Plywood
Urea-formaldehyde (UF) resin (F/U: 1.25), melamine-urea-formaldehyde (MUF) resin (F/(U+M): 1.05), and three kinds of wood species including poplar (Populus davidiana Dode), beech (Fagus engleriana Seem.), and eucalyptus (Eucalyptus robusta Smith) were used to produce plywood. The effects of sealing treatment and wood species on the formaldehyde emissions were studied. The anatomical characteris...
متن کاملCharacteristics on indoor air pollutant emission from wood-based flooring by environmental-friendly natural adhesive using CNSL
To discuss the reduction of formaldehyde and volatile organic compound (VOC) emissions from engineered flooring, cashew nut shell liquid (CNSL)-formaldehyde (CF) resin and CF/PVAc resin were applied for the maple face of the veneer bonding on plywood. The CF resin was used to replace urea-formaldehyde (UF) resin in the formaldehyde-based resin system in order to reduce formaldehyde and VOC emis...
متن کامل