Analysis of neutron diffraction spectra acquired in situ during stress- induced transformations in superelastic NiTi

نویسندگان

  • R. Vaidyanathan
  • M. A. M. Bourke
  • D. C. Dunand
چکیده

Neutron diffraction spectra were obtained during various stages of a reversible stress-induced austenite to martensite phase transformation in superelastic NiTi. This was accomplished by neutron diffraction measurements on bulk polycrystalline NiTi samples simultaneously subjected to mechanical loading. Analysis of the data was carried out using individual lattice plane ~hkl! reflections as well as by Rietveld refinement. In the Rietveld procedure, strains in austenite were described in terms of an isotropic ~hkl independent! and an anisotropic ~hkl dependent! component. At higher stresses, austenite lattice plane reflections exhibited nonlinear and dissimilar elastic responses which may be attributed to the transformation. The texture evolution is significant in both austenite and martensite phases during the transformation and two approaches were used to describe this evolving texture, i.e., an ellipsoidal model due to March–Dollase and a generalized spherical-harmonic approach. The respective predictions of the phase fraction evolution as a function of applied stress were compared. A methodology is thus established to quantify the discrete phase strains, phase volume fractions, and texture during such transformations. © 1999 American Institute of Physics. @S0021-8979~99!09118-5#

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Stress-induced martensitic transformations in NiTi and NiTi–TiC composites investigated by neutron diffraction

Superelastic NiTi (51.0 at.% Ni) specimens reinforced with 0, 10 and 20 vol.% TiC particles were deformed under uniaxial compression while neutron diffraction spectra were collected. The experiments yielded in-situ measurements of the thermoelastic stress-induced transformation. The evolution of austenite/martensite phase fractions and of elastic strains in the reinforcing TiC particles and the...

متن کامل

An in Situ Neutron Diffraction Mechanical Study of Superelastic Niti and Niti-tic Composites

Superelastic NiTi and NiTi-TiC composites were subjected to static uniaxial compressive loading while neutron diffraction spectra were simultaneously acquired. A methodology was established to obtain quantitative strain, texture and phase volume fraction information during the forward and reverse stress-induced martensitic transformation. Despite the presence of 10 vol. % of stiff TiC particles...

متن کامل

Mechanical Properties of Superelastic and Shape - Memory NiTi and NiTi - TiC Composites

The objective of this work was to study materials subjected to external loading where alternative deformation mechanisms are available to generate strains. In the case of shapememory and superelastic NiTi, these mechanisms are twinning and stress-induced phase transformation, respectively. Superelastic NiTi (51.0 at.% Ni) reinforced with 0, 10 and 20 vol.% TiC particles was fabricated by Hot Is...

متن کامل

Texture, Strain, and Phase-Fraction Measurements during Mechanical Cycling in Superelastic NiTi

parameters in-situ during the transformation and to obtain SUPERELASTICITY is a deformation mechanism phase-specific information. However, neutrons penetrate observed in NiTi and other allotropic, ordered alloys where deeper than X-rays (several millimeters, compared to a few the high-temperature cubic phase (austenite), when subjected micrometers for X-rays from a conventional source). Thus, t...

متن کامل

Texture, Strain, and Phase-Fraction Measurements during Mechanical Cycling in Superelastic NiTi

parameters in-situ during the transformation and to obtain SUPERELASTICITY is a deformation mechanism phase-specific information. However, neutrons penetrate observed in NiTi and other allotropic, ordered alloys where deeper than X-rays (several millimeters, compared to a few the high-temperature cubic phase (austenite), when subjected micrometers for X-rays from a conventional source). Thus, t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1999