Modelling and Simulation of the Hydraulic Control System with Elastically Mounted Load Mass
نویسنده
چکیده
This paper concerns the influence of elastic mounting on the dynamic properties of hydrostatic control system. Digital simulation of the drives with rigid mounting and with elastically mounted load mass was performed in order to adapt their dynamic models to the physical model at the laboratory stand. The influence of parameters of the system, external load and friction on the dynamic properties of hydrostatic drives was analyzed.
منابع مشابه
Modeling and Simulation of Variable Frequency Pump Control Fatigue Test Machine
High-speed maglev train is considered an ideal vehicle in the 21st Century, as an important part of the train, the travel mechanism bears and delivers a variety of vertical and horizontal alternating load in operation, it affects the operation safety of the train directly, so key components of the travel mechanism should under fatigue strength test by fatigue test machine.The paper proposed a v...
متن کاملVIV of Tapered Cylinders: 3D LES Numerical Simulation
In the present study, the author’s previous experimental investigations on the vortex induced vibration of uniform and tapered circular cylinders are numerically simulated. The circular cylinders have medium mass ratios (5.93, 6.1), low mass-damping parameters (0.0275, 0.0279) a mean diameter of 0.028m and an aspect ratio of about 14. A fully coupled two-way fluid-structure interaction (FSI) an...
متن کاملDEVELOPMENT OF A DC MOTOR ASSISTED HYDRAULIC BRAKING SYSTEM FOR AUTOMOTIVE USE
ABSTRACT: Deceleration or stopping the vehicle without any diving and lateral acceleration is essential to develop an effective braking system. The hydraulic braking system with intelligent braking called Antilock Braking system (ABS) and Electronic Stability Control (ESC) has been introduced. However, due to the insufficient human effort, the ABS and ESC to some extent, not function well...
متن کاملOptimal Adjustment of Three-Term Controller and Two-Term Compensator Performances in Hydro Power Systems for Load Frequency Control
An important issue with respect to the hydraulic power systems is the frequency stabilization. To design Load Frequency Control (LFC) with high efficiency, control parameters need to be adjusted so that the system frequency remains stable even under changeable conditions. Controlling the frequency and changes in the turbine time constant requires that three term control parameters of Proportion...
متن کاملOscillation Control of Aircraft Shock Absorber Subsystem Using Intelligent Active Performance and Optimized Classical Techniques Under Sine Wave Runway Excitation (TECHNICAL NOTE)
This paper describes third aircraft model with 2 degrees of freedom. The aim of this study is to develop a mathematical model for investigation of adoptable landing gear vibration behavior and to design Proportional Integration Derivative (PID) classical techniques for control of active hydraulic nonlinear actuator. The parameters of controller and suspension system are adjusted according to be...
متن کامل