Thermal Strain of Green Hinoki Wood: Separating the Hygrothermal Recovery and the Reversible Deformation
نویسندگان
چکیده
Heating of green wood involves a complex set of deformation processes, including reversible thermal strain, reversible shrinkage due to decrease of moisture content, and irreversible viscoelatic recovery of growth stress activated by temperature called hygrothermal recovery (HTR). Experimental tests were performed on small Japanese Cypress specimens oriented in the three principal R, T, L directions, using a Thermo Mechanical Analyser. The analysis allowed the separation of the hygrothermal recovery from the reversible components of the deformation.
منابع مشابه
Hygrothermal Analysis of Laminated Composite Plates by Using Efficient Higher Order Shear Deformation Theory
Hygrothermal analysis of laminated composite plates has been done by using an efficient higher order shear deformation theory. The stress field derived from hygrothermal fields must be consistent with total strain field in this type of analysis. In the present formulation, the plate model has been implemented with a computationally efficient C0 finite element developed by using consistent strai...
متن کاملStress Redistribution Analysis of Piezomagnetic Rotating Thick-Walled Cylinder with Temperature-and Moisture-Dependent Material Properties
In this article, the problem of time-dependent stress redistribution of a piezomagnetic rotating thick-walled cylinder under an axisymmetric hygro-thermo-magneto-electro-mechanical loading is analyzed analytically for the condition of plane strain. Using the constitutive equations, a differential equation is found in which there are creep strains. Primarily, eliminating creep strains, an analyt...
متن کاملExperimental Assessment of Hygrothermal Performance of Wood Frame Wall System in Suzhou's Lake Tai Climate Zone
A long-term onsite assessment of the hygrothermal performance of a wood frame wall system is presented in this work. The system was applied in a wood demonstration house within the Lake Tai climate zone of Suzhou, China. The hygrothermal performance of the cavity insulation wall was determined from the temperature, relative humidity, and from the temperature of the wood material surface through...
متن کاملInfluence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates
In this article, vibration characteristics and the parametric instability of functionally graded material (FGM) plates with cyclic loading in a hygrothermal field are discussed. The plate element is modeled in a finite element by applying the third-order shear deformation hypothesis. The mathematical formulation of the FGM plate is made with two material constituents by applying the power rule ...
متن کاملPREDICTION OF HOT DEFORMATION BEHAVIOUR OF A PH STAINLESS STEEL AT HIGH STRAIN RATES
In this study the hot deformation behaviour of a precipitation hardened (PH) stainless steel at high strain rates has been predicted through hot compression testing. Stress-strain curves were obtained for a range of strain rates from 10-3 to 10+1 S-1 and temperatures from 850 to 1150°C. Results obtained by microstructure and stress-strain curves show that at low temperatures and high strain rat...
متن کامل