GEANT4 Emittance Diagnostics Simulations for the ERL Injector Prototype

نویسنده

  • Colwyn Gulliford
چکیده

The injector for the Energy Recovery Linac, a new high energy X-ray source under design at Cornell, will need to create ultra bright electron beams. One measure of this brightness, the transverse emittance, is the single most important characteristic of these beams. It is therefore crucial to be able get an accurate measure of this quantity. Two experimental designs to perform this measurement have been proposed and have been examined using computer simulation.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High Brightness, High Current Injector Design for the Cornell Erl Prototype∗

Cornell University, in collaboration with Jefferson Laboratory, has proposed the construction of a 100 MeV, 100 mA CW Energy Recovery Linac (ERL) prototype, to study and resolve the many accelerator physics and technology issues of this type of machine. The long term goal of this work is the construction of a state-of-the-art 5 to 7 GeV ERL-based synchrotron light source. A key element of this ...

متن کامل

First Tests of the Cornell University Erl Injector*

Cornell University is planning to build an Energy Recovery Linac (ERL) X-ray facility. For an ERL, it is well known that the x-ray beam brightness for the users is mainly determined by the initial electron beam emittance provided by the injector. To address technical challenges of producing very low emittance beams at high average current as required for an ERL, Cornell University has proposed ...

متن کامل

Design and Performance of the Cornell ERL DC Photoemission Gun

Cornell University is planning to build an Energy Recovery Linac (ERL) X-ray facility. For an ERL, it is well known that the x-ray beam brightness for the users is mainly determined by the initial electron beam emittance provided by the injector To address technical challenges of producing very low emittance beams at high average current as required for an ERL, Cornell University has proposed a...

متن کامل

Simulation study of Cornell L0 beamline

To generate high quality synchrotron radiation in the future ERL light sources, the performance of the ERL injector, which has critical components, a photo cathode gun and super conducting cavities, is very important. In the injector, an electron beam is generated by photo cathode DC gun, and accelerated by super conducting RF cavities. Since an electron beam with −77 pC bunch charge and 1.3 GH...

متن کامل

Progress on the Relativistic Klystron Two-Beam Accelerator Prototype

The technical challenge for making two-beam accelerators into realizable power sources lies in the creation of the drive beam and in its propagation over long distances through multiple extraction sections. This year we have been constructing a 1.2-kA, 1-MeV, electron induction prototype injector as a collaborative effort between LBL and LLNL. The electron source will be a 3.5” -diameter, therm...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006