Interface pressures and shear stresses at thirteen socket sites on two persons with transtibial amputation.

نویسندگان

  • J E Sanders
  • D Lam
  • A J Dralle
  • R Okumura
چکیده

Residual limb/prosthetic socket interface pressures and shear stresses were measured at 13 sites on two subjects with unilateral transtibial amputation (TTA) using total-contact patellar-tendon-bearing prostheses. Maximal interface stresses during stance phase for each of 13 transducer sites were determined, then means for all steps calculated. Maximal pressure and resultant shear stress during stance phase were shown at anterior distal or mid-limb sites and the maxima occurred during the first 50% of stance phase. Anterior medial and lateral proximal sites showed their greatest pressure during the second 50%. At lateral mid-limb and popliteal fossa sites, resultant shear stress directions suggest that soft tissue was displaced toward the socket brim during weight-bearing. Results also suggest that skin across the distal tibial crest was in tension at the times of the first and second peaks in the shank axial force-time curve in all sessions. Significant difference (p < 0.05) in maximal stresses between sessions conducted > 3 weeks apart were apparent for both subjects.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Generic, geometric finite element analysis of the transtibial residual limb and prosthetic socket.

Finite element (FE) analysis was used to investigate the stress distribution between the residual limb and prosthetic socket of persons with transtibial amputation (TTA). The purpose of this study was to develop a tool to provide a quantitative estimate of prosthetic interface pressures to improve our understanding of residual limb/prosthetic socket biomechanics and prosthetic fit. FE models of...

متن کامل

Parametric analysis using the finite element method to investigate prosthetic interface stresses for persons with trans-tibial amputation.

A finite element (FE) model of the below-knee residual limb and prosthetic socket was created to investigate the effects of parameter variations on the interface stress distribution during static stance. This model was based upon geometric approximations of anthropometric residual limb geometry. The model was not specific to an individual with amputation, but could be scaled to approximate the ...

متن کامل

Parametric analysis using the finite element method to investigate prosthetic interface stresses for persons with below-knee amputation

A finite element (FE) model of the below-knee residual limb and prosthetic socket was created to investigate the effects of parameter variations on the interface stress distribution during static stance . This model was based upon geometric approximations of anthropometric residual limb geometry . The model was not specific to an individual with amputation, but could be scaled to approximate th...

متن کامل

Generic, geometric finite element analysis of the transtibial residual limb and prosthetic socket

Finite element (FE) analysis was used to investigate the stress distribution between the residual limb and prosthetic socket of persons with transtibial amputation (TTA) . The purpose of this study was to develop a tool to provide a quantitative estimate of prosthetic interface pressures to improve our understanding of residual limblprosthetic socket biomechanics and prosthetic fit. FE models o...

متن کامل

Effect of prosthetic gel liner thickness on gait biomechanics and pressure distribution within the transtibial socket.

Prosthetic gel liners are often prescribed for persons with lower-limb amputations to make the prosthetic socket more comfortable. However, their effects on residual limb pressures and gait characteristics have not been thoroughly explored. This study investigated the effects of gel liner thickness on peak socket pressures and gait patterns of persons with unilateral transtibial amputations. Pr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Journal of rehabilitation research and development

دوره 34 1  شماره 

صفحات  -

تاریخ انتشار 1997