Progress in Electrolyte-Free Fuel Cells
نویسندگان
چکیده
1 Jiangsu Provincial Key Laboratory of Solar Energy Science and Technology, School of Energy and Environment, Southeast University, Nanjing, China, 2 Faculty of Physics and Electronic Technology, Hubei Collaborative Innovation Center for Advanced Organic Materials, Hubei University, Wuhan, China, 3 Department of Energy Technology, Royal Institute of Technology KTH, Stockholm, Sweden, 4 Ångström Laboratory, Department of Engineering Sciences, Uppsala University, Uppsala, Sweden, 5 Department of Aeronautical and Automotive Engineering, Loughborough University, Loughborough, UK, 6 Nanjing Yunna Nano Technology Co., Ltd., Nanjing, China
منابع مشابه
Recent progress in electrocatalysts with mesoporous structures for application in polymer electrolyte membrane fuel cells
Recently mesoporous materials have drawn great attention in fuel cell related applications, such as preparation of polymer electrolyte membranes and catalysts, hydrogen storage and purification. In this mini-review, we focus on recent developments in mesoporous electrocatalysts for polymer electrolyte membrane fuel cells, including metallic and metal-free catalysts for use as either anode or ca...
متن کاملStudy of flow and heat transfer characteristics in a periodic zigzag channel for cooling of polymer electrolyte fuel cells
In this study, a periodic zigzag channel with rectangular cross-section has been used in order to obtain a high-efficiency system for cooling a polymer electrolyte fuel cell. An appropriate function of fuel cells and enhancement of their lifetime require uniform temperature conditions of around 80°C. On the other hand, due to volume and weight constraints, a low-density compact heat exchanger i...
متن کاملThe Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell
Using flawless components are important for a proper material selection and best working conditions to achieve the best performance of solid oxide fuel cells (SOFCs). Tape casting is the most used process for the fabrication of SOFC parts, especially anode and electrolyte due to its advantages regarding the other processes. In this study, the effect of slurry composition and milling time were s...
متن کاملSynthesized Bimetallic Electrocatalyst for Oxygen Reduction Reaction in Polymer Electrolyte Fuel Cells
In the present study, a step by step process was applied to synthesize bimetallic electrocatalyst (Ru and Pt on VulcanXC-72R). This process can reduce the amount of platinum and increase the gas diffusion electrode (GDE) performance in the cathodic reaction of polymer electrolyte membrane fuel cells (PEMFCs). Using the impregnation by hydrothermal synthesis method, a series of electrocatalysts ...
متن کاملNumerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells
In present work, numerical analysis of three novel PEM fuel cells with tubular geometry was conducted. Tree different cross section was considered for PEM, namely: circular, square and triangular. Similar boundary and operational conditions is applied for all the geometries. At first, the obtained polarization curve for basic architecture fuel cells was validated with experimental data and then...
متن کاملA carbon dioxide tolerant aqueous-electrolyte-free anion-exchange membrane alkaline fuel cell.
Despite over a century of study and decades of intensive research, few fuel cell products have appeared on the market. The major inhibitor to mass commercialisation is cost. H2/air alkaline fuel cells (AFCs) containing KOH(aq) electrolyte promise the lowest cost devices, with the ability to use non-Pt catalysts. The fundamental problem with AFCs is that the KOH(aq) electrolyte reacts with CO2 (...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016