A MEMS-based Air Flow Sensor with a Free-standing Micro-cantilever Structure
نویسندگان
چکیده
This paper presents a micro-scale air flow sensor based on a free-standingcantilever structure. In the fabrication process, MEMS techniques are used to deposit asilicon nitride layer on a silicon wafer. A platinum layer is deposited on the silicon nitridelayer to form a piezoresistor, and the resulting structure is then etched to create afreestanding micro-cantilever. When an air flow passes over the surface of the cantileverbeam, the beam deflects in the downward direction, resulting in a small variation in theresistance of the piezoelectric layer. The air flow velocity is determined by measuring thechange in resistance using an external LCR meter. The experimental results indicate that theflow sensor has a high sensitivity (0.0284 ω/ms-1), a high velocity measurement limit (45ms-1) and a rapid response time (0.53 s).
منابع مشابه
Couple Stress Effect on Micro/Nanocantilever-based Capacitive Gas Sensor
Micro/nanocantilevers have been employed as sensors in many applications including chemical and biosensing. Due to their high sensitivity and potential for scalability, miniature sensing systems are in wide use and will likely become more prevalent in micro/nano-electromechanical systems (M-NEMSs). This paper is mainly focused on the use of sensing systems that employ micro/nano-size cantilever...
متن کاملA MEMS-Based Flow Rate and Flow Direction Sensing Platform with Integrated Temperature Compensation Scheme
This study develops a MEMS-based low-cost sensing platform for sensing gas flow rate and flow direction comprising four silicon nitride cantilever beams arranged in a cross-form configuration, a circular hot-wire flow meter suspended on a silicon nitride membrane, and an integrated resistive temperature detector (RTD). In the proposed device, the flow rate is inversely derived from the change i...
متن کاملA Smart Flow Sensor for Flow Direction Measurement
The purpose of this paper is to apply MEMS techniques to manufacture a gas flow sensor that consists with an airflow rate and airflow direction sensing units for detection of airflow states. This study uses a silicon wafer as a substrate which is deposited silicon nitride layers. To form the airflow rate sensing unit, a micro heater and a sensing resistor are manufactured over a membrane that r...
متن کاملAnalytical Approach for Vibration Analysis of a Microsensor with Two layers of Silicon and Piezoelectric based on MCST
The vibration analysis is an important step in the design and optimization of microsensors. In most of the cases, COMSOL software is employed to consider the size-dependency on the dynamic behavior in the MEMS sensors. In this paper, the Modified Couple Stress Theory (MCST) is used to capture the size effect on dynamic behavior in a microsensor with two layers of the silicon and piezoelectric. ...
متن کاملMathematical Model of a Proposed Carbon Nanotube Sensor for Ultra Sensitive Acetone Sensing
Abstract: In recent years, MEMS/NEMS (Micro-/Nano Electro Mechanical Systems) sensors have attracted tremendous interest among researchers due to their low cost, quick response time, as well as high sensitivity and selectivity. In this paper, an ultra sensitive acetone sensor based on carbon nanotube (CNT) structure is proposed. In this device, a carbon nanotube is anchored to a substrate in on...
متن کامل