A Performance Driven Switching Control of DC-DC Converters
نویسندگان
چکیده
This paper reports the application of the switching control method based on the controller performance assessment. The switching of the controllers are done based on the current control performances. The accepted controller has the best estimated performance of all controllers. Finally, the practically and utility of this idea are evaluated by the voltage control result of the DC-DC converters.
منابع مشابه
A High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications
This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...
متن کاملA Repetitive Control- based Approach for Power Sharing among Boost Converters in DC Microgrids
In this paper a repetitive control (RC) approach to improve current sharing between parallel-connected boost converters in DC microgrids is presented. The impact of changes in line impedance on current sharing is investigated. A repetitive controller is designed and connected in series with current controller of the boost converters to control the switching signals such that by regulating of th...
متن کاملDigital Control for Dynamic Performance Enhancement of DC-DC Switching Converters
In this paper, an overview of recent advances in digital control of lowto medium-power dc-dc switching converters is presented. Traditionally, analog electronics methods have dominated in controlling such dc-dc converters. However, with the steadily decreasing cost of ICs, the feasibility of digitally controlled dc-dc switching converters has increased significantly. This paper outlines a sampl...
متن کاملIncreasing Voltage Gain by New Structure of Inductive Switching DC-DC Converter
In a photovoltaic system, sun light energy is converted to electricity. The generatedelectricity has a low DC voltage. In order to increase voltage generated by photovoltaic cells (PV),an additive DC-DC converter is required to raise the low voltage to a good level which provides theconditions for connection to DC-DC converters. Low wastes, low costs, and high efficiency are someother specifica...
متن کاملIntroduction and Analysis of a Novel Quasi - Series Resonant DC Link
Soft Switcing techniques have recently been applied in the design of dc-ac converters, in order to achive better performance, higher efficiency, and power density. One of the soft switching techniques uesd in inverters is resonant dc links. These topologies have some disadvantages such as irregular current peaks, large voltage peaks, uncotrollble pulse width, etc. Another soft switching method ...
متن کامل