Optical Fiber LSPR Biosensor Prepared by Gold Nanoparticle Assembly on Polyelectrolyte Multilayer
نویسندگان
چکیده
This article provides a novel method of constructing an optical fiber localized surface plasmon resonance (LSPR) biosensor. A gold nanoparticle (NP) assembled film as the sensing layer was built on the polyelectrolyte (PE) multilayer modified sidewall of an unclad optical fiber. By using a trilayer PE structure, we obtained a monodisperse gold NP assembled film. The preparation procedure for this LSPR sensor is simple and time saving. The optical fiber LSPR sensor has higher sensitivity and outstanding reproducibility. The higher anti-interference ability for response to an antibody makes it a promising method in application as a portable immuno-sensor.
منابع مشابه
Extended-range glucose biosensor via layer-by-layer assembly incorporating gold nanoparticles.
We report on a glucose oxidase (GOx)/polyelectrolyte (PE)/gold nanoparticle (AuNP) multilayer films that can be utilized as efficient glucose biosensors by layer-by-layer self-assembly method. Electrochemical impedance spectroscopy (EIS) and UV-visible spectroscopy were adopted to monitor the regular growth of the multilayer films. The role of gold nanoparticles integrated in the multilayer fil...
متن کاملCharacterization of localized surface plasmon resonance transducers produced from Au(25) nanoparticle multilayers.
This article reports the preparation of gold plasmonic transducers using a nanoparticle self-assembly/heating method and the characterization of the films using scattering-type scanning near-field optical microscopy (s-SNOM). Nanoparticle-polymer multilayer films were prepared by the layer-by-layer assembly on glass slides by alternating exposures to monodisperse Au(25) nanoparticles and ionic ...
متن کاملOptical properties of multilayer-polyelectrolyte films with incorporated gold nanomaterials (solid nanoparticles and hollow nanoshells)
The growth of various multilayer‐polymer multilayer‐nanoparticle films was successfully achieved. Multilayer‐polymer multilayer‐nanoparticle films with 1, 3, and 5 polymer layers between nanoparticle layers exhibit significantly different optical properties due to the differences in magnitude of particle plasmon coupling. These film systems were also successfully extended to hollow gold nanosh...
متن کاملBiofunctionalization of a Fiber Optics-Based LSPR Sensor
When exposed to light, metal nanoparticles exhibit a phenomenon known as LSPR, Localized Surface Plasmon Resonance. The wavelengths at which LSPR occurs is very dependent on the refractive index of the surrounding medium. Binding of biomolecules to the surface of gold nanoparticles result in a change in the refractive index that can be detected spectrophotometrically by monitoring the LSPR peak...
متن کاملPreparation of Gold Nanoisland Arrays from Layer-by-Layer Assembled Nanoparticle Multilayer Films
This article introduces a facile nanoparticle self-assembly/annealing method for the preparation of nanoisland films. First, nanoparticle-polymer multilayer films are prepared with layer-by-layer assembly. Nanoparticle multilayer films are then annealed at ~ 500 C in air to evaporate organic matters from the films. During the annealing process, the nanoparticles on the solid surface undergo nuc...
متن کامل