Synthesis , Ionic Conductivity , and Thermal Properties of Proton Conducting Polymer Electrolyte for High Temperature
نویسندگان
چکیده
Hyperbranched polymer (poly-1a) with sulfonic acid groups at the end of chains was successfully synthesized. Interpenetration reaction of poly-1a with a hyperbranched polymer with acryloyl groups at the end of chains (poly-1b) as a cross-linker afforded a tough electrolyte membrane. The poly-1a and the resulting electrolyte membrane showed the ionic conductivities of 7x10 and 8x10 S/cm, respectively, at 150 oC under dry condition. The ionic conductivities of the poly-1a and the electrolyte membrane exhibited the VTF type temperature dependence. And also, both poly-1a and the resulting electrolyte membrane were thermally stable up to 200 oC.
منابع مشابه
Pii: S0079-6700(00)00032-0
This paper presents an overview of the synthesis, chemical and electrochemical properties, and polymer electrolyte fuel cell applications of new proton-conducting polymer electrolyte membranes based on hydrocarbon polymers. Due to their chemical stability, high degree of proton conductivity, and remarkable mechanical properties, per ̄uorinated polymer electrolytes such as Na®on, Aciplex, Flemion...
متن کاملPreparation and characterization of lithium ion conducting polymer electrolytes based on a blend of poly(vinylidene fluoride-co-hexafluoropropylene) and poly(methyl methacrylate)
Ion conducting polymer electrolytes composed of poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP), poly(methyl methacrylate) (PMMA) and lithium triflate (LiTf) were prepared using the solution casting method. Structural change and complex formation in the blend electrolyte systems were confirmed from the X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and scann...
متن کاملSynthesis of Novel Proton Conducting Mesoporous Silica (ms) Films for High Temperature Pem Fuel Cells
Transparent free-standing mesoporous silica (MS) films were synthesized from a system of TMOS-Brij-Acid-H2O. The non-ionic surfactants used included Brij 22 (C12EO10OH), Brij 56 (C16EO10OH), and Brij 76 (C18EO10OH). The acids used include HCl, H3PO4, and CF3SO3H. The effect of synthesis parameters on the synthesis and the proton conductivity of mesoporous silica were investigated. The Brij 56/C...
متن کاملA PEO-based gel polymer electrolyte for lithium ion batteries
A lithium-ion conducting gel polymer electrolyte (GPE) membrane containing PEO as a polymer host and liquid electrolyte has been prepared by a simple one-step procedure. The prepared electrolyte membrane exhibits a good ionic conductivity of 3.3 10 3 S cm 1 and high lithium transference number of 0.76 at room temperature. Meanwhile, the gel polymer electrolyte membrane shows very good thermal s...
متن کاملEnhanced proton transport in nanostructured polymer electrolyte/ionic liquid membranes under water-free conditions.
Proton exchange fuel cells (PEFCs) have the potential to provide power for a variety of applications ranging from electronic devices to transportation vehicles. A major challenge towards economically viable PEFCs is finding an electrolyte that is both durable and easily passes protons. In this article, we study novel anhydrous proton-conducting membranes, formed by incorporating ionic liquids i...
متن کامل