Geometry Induced by a Diffusion Process
نویسنده
چکیده
ABSTRACT: For nonlinear functions f of a random vector Y , E[ f ( Y )] and f (E[ Y ]) usually differ. Consequently the mathematical expectation of Y is not intrinsic: when we change coordinate systems, it is not invariant.This article is about a fundamental and hitherto neglected property of random vectors of the form , where X ( t ) is the value at time t of a diffusion process X : namely that there exists a measure of location, called the Òintrinsic location parameterÓ (ILP), which coincides with mathematical expectation only in special cases, and which is invariant under change of coordinate systems. The construction uses martingales with respect to the intrinsic geometry of diffusion processes, and the heat flow of harmonic mappings. We compute formulas which could be useful to statisticians, engineers, and others who use diffusion process models; these have immediate application, discussed in a separate article, to the construction of an intrinsic nonlinear analog to the Kalman Filter. We present here a numerical simulation of a nonlinear SDE, showing how well the ILP formula tracks the mean of the SDE for a Euclidean geometry.
منابع مشابه
Stochastic averaging for SDEs with Hopf Drift and polynomial diffusion coefficients
It is known that a stochastic differential equation (SDE) induces two probabilistic objects, namely a difusion process and a stochastic flow. While the diffusion process is determined by the innitesimal mean and variance given by the coefficients of the SDE, this is not the case for the stochastic flow induced by the SDE. In order to characterize the stochastic flow uniquely the innitesimal cov...
متن کاملبررسی و مدلسازی اثر ناپایداری در دمای بالا و بایاس منفی (NBTI) و تزریق حاملهای پرانرژی (HCI) در افزارههای چندگیتی نانومتری
In this paper, analytical models for NBTI induced degradation in a P-channel triple gate MOSFET and HCI induced degradation in an N-channel bulk FinFET are presented, through solving the Reaction-Diffusion equations multi-dimensionally considering geometry dependence of this framework of equations. The new models are compared to measurement data and gives excellent results. The results interpre...
متن کاملEffect of Pullback Speed and the Distance between the Skin and Vein on the Performance of Endovenous Laser Treatment by Numerical Simulation
Introduction: Endovenous laser treatment (ELT) is a new treatment method for the reflux of the great saphenous vein. A successful ELT is dependent on the selection of optimum parameters required to achieve optimal vein damage while avoiding side effects including skin burns. The mathematical modeling of ELT can be used to understand the process of ELT. This study was conducted to examine the ef...
متن کاملNew geometry for TCP: severe plastic deformation of tubes
Since tubes are widely used for different industrial applications, processing of tubes by the Severe Plastic Deformation (SPD) method has been the target of different attempts. Among these attempts, development of SPD processes for tubes based on Equal Channel Angular Pressing (ECAP) has been more successful. As an illustration, Tube Channel Pressing (TCP) has been presented as an attractive SP...
متن کاملA CFD Simulation of Hydrogen Production in Microreactors
In this study, the modeling of hydrogen production process in microreactors by methanol-steam reforming reaction is investigated. The catalytic reaction of methanol-steam reforming producing hydrogen is simulated considering a 3D geometry for the microreactor. To calculate diffusion among species, mixture average correlations are compared to Stephan-Maxwell equations. The reactions occurring in...
متن کاملModeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing
Additive Manufacturing describes the technologies that can produce a physical model out of a computer model with a layer-by-layer production process. Additive Manufacturing technologies, as compared to traditional manufacturing methods, have the high capability of manufacturing the complex components using minimum energy and minimum consumption. These technologies have brought about the possibi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1997