Analysis and design of soft-switching power factor correction converter
نویسندگان
چکیده
* This project is funded under the NASA-KSC STTR-Phase I Program. ABSTRACT A single-stage power factor correction converter with softswitching is proposed in this paper. The topology of this converter is derived by adding a resonant circuit to an existing Single-Stage, Single-Switch Power Factor Correction (S PFC) converter. As a result, zero-voltage-switching and zero-current-switching are achieved for the main switch and the auxiliary switch, respectively. High frequency operation of the proposed converter makes the ac-dc power supply possible to be minimized in size and weight. The proposed converter uses a grounded auxiliary switch so that the isolated driving circuit is not required. The simplified driving circuitry will again improve the overall efficiency and power density. Practically, the direct driving schemes of both the main and the auxiliary switches will allow the proposed converter to operate in even high switching frequency and have good regulation capability.
منابع مشابه
Analysis and Experimentation of Soft Switched Interleaved Boost Converter for Photovoltaic Applications
Conventional energy sources are fast depleting due to poor conservation practises and excessive usage while the world’s energy demands are growing by minute. Additionally, the cost of producing conventional energy is rising also leading to an increase in harmful environmental pollution. Hence, there is a need to look at alternative energy sources such as sun, water and wind. Photovoltaic (PV) i...
متن کاملA Soft Switched DC-DC Boost Converter for Use in Grid Connected Inverters
This paper presents a soft-switching DC-DC boost converter, which can be utilized in renewable energy systems such as photovoltaic array, and wind turbine connections to infinite bus of a big power network, using grid connected inverters. In the proposed topology for the DC-DC boost converter, the main and the auxiliary power switches are turned on and turned off with zero voltage switching (ZV...
متن کاملAn Efficient High-Step-Up Soft-Switching Boost Converter for Photovoltaic Application
In this paper an efficient high step-up converter with a coupled- inductor with soft- switching operation is presented. The proposed topology includes a coupled-inductor boost converter for raising the voltage gain. Moreover, a simple auxiliary resonant circuit composed of an auxiliary switch, a clamping diode and a resonant tank (inductor, capacitor), is adopted in this paper. The coupled-indu...
متن کاملImproved Parallel Boost Power Converter for Power Factor Correction
The main objective of the study is to analysis and design parallel boost power converter for power factor correction using an active filtering approach by implementing single-phase soft-switching technique with an active snubber circuit. Zero voltage transition to turn ON and zero current transition to turn OFF is implemented by the active snubber circuit for the main switches with no any furth...
متن کاملA High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications
This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...
متن کاملSimulation and Experimental Verification of Closed Loop Operation of Buck / Boost DC-DC Converter with Soft Switching
A major problem in an isolated DC/DC converters operating at high switching frequencies is the attendant switching losses in the semiconductor devices. This can be reduced by introducing either zero-voltage switching (ZVS) or zero-current switching (ZCS) of the semiconductor switches. This paper deals with the simulation, design, fabrication and experimental evaluation of a novel soft-switching...
متن کامل