Dynamics of parallel manipulators by means of screw theory
نویسندگان
چکیده
An approach to the dynamic analysis of parallel manipulators is presented. The proposed method, based on the theory of screws and on the principle of virtual work, allows a straightforward calculation of the actuator forces as a function of the external applied forces and the imposed trajectory. In order to show the generality of such a methodology, two case studies are developed, a 2-DOF parallel spherical mechanism and a Gough–Stewart platform. 2003 Elsevier Ltd. All rights reserved.
منابع مشابه
Stability Analysis and Robust PID Control of Cable Driven Robots Considering Elasticity in Cables
In this paper robust PID control of fully-constrained cable driven parallel manipulators with elastic cables is studied in detail. In dynamic analysis, it is assumed that the dominant dynamics of cable can be approximated by linear axial spring. To develop the idea of control for cable robots with elastic cables, a robust PID control for cable driven robots with ideal rigid cables is firstly de...
متن کاملAcceleration Analysis of 3-RPS Parallel Manipulators by Means of Screw Theory
According to the notation proposed by the International Federation for the Theory of Mechanisms and Machines IFToMM (Ionescu, 2003); a parallel manipulator is a mechanism where the motion of the end-effector, namely the moving or movable platform, is controlled by means of at least two kinematic chains. If each kinematic chain, also known popularly as limb or leg, has a single active joint, the...
متن کاملThe Jacobian Analysis of a Parallel Manipulator Using the Theory of Reciprocal Screws
In this paper, the theory of reciprocal screws is reviewed. Reciprocal screw systems associated with some frequently used kinematic pairs and chains are developed. Then, the application of reciprocal screw systems for the Jacobian analysis of parallel manipulators is described. The Jacobian and singular conditions of a six-dof parallel manipulator are analyzed.
متن کاملKinematic Analysis of Lower Mobility Cooperative Arms by Screw Theory
This paper studies the kinematic modeling and analysis of two cooperative manipulators. Cooperative manipulators are defined as multi-arm systems working together on a common task. The task is defined as the transportation of an object in space. In this paper the cooperative system is the dual arm of the humanoid Nao robot, where the serial structure of each arm has five degrees of freedom. The...
متن کاملInterval Analysis of Controllable Workspace for Cable Robots
Workspace analysis is one of the most important issues in the robotic parallel manipulator design. However, the unidirectional constraint imposed by cables causes this analysis more challenging in the cabledriven redundant parallel manipulators. Controllable workspace is one of the general workspace in the cabledriven redundant parallel manipulators due to the dependency on geometry parameter...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003