Recent Advances and Perspectives in Synchrotron Radiation TXRF

نویسندگان

  • K. Baur
  • S. Brennan
چکیده

Total reflection x-ray fluorescence (TXRF) using Synchrotron Radiation is likely to be the most powerful non-destructive technique for the analysis of trace metal impurities on silicon wafer surfaces. Of fundamental importance in TXRF is the achievable sensitivity as characterized by the minimum detection limit. This work describes the progress we achieved recently at the Stanford Synchrotron Radiation Laboratory (SSRL) in minimum detection limits for transition metals and will give an estimate of what can be achieved using a third generation synchrotron radiation source such as SPEAR3.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synchrotron radiation induced TXRF†

The use of synchrotron radiation (SR) as an excitation source for total reflection X-ray fluorescence analysis (TXRF) offers several advantages over X-ray tube excitation. Detection limits in the fg range can be achieved with efficient excitation for low Z as well as high Z elements due to the features of synchrotron radiation and in particular the high brilliance in a wide spectral range and t...

متن کامل

Synchrotron radiation-induced total reflection X-ray fluorescence analysis

Synchrotron radiation-induced total reflection X-ray fluorescence (SR-TXRF) analysis is a high sensitive analytical technique that offers limits of detection in the femtogram range for most elements. Besides the analytical aspect, SR-TXRF is mainly used in combination with angle-dependent measurements and/or X-ray absorption near-edge structure (XANES) spectroscopy to gain additional informatio...

متن کامل

Synchrotron Radiation Total Reflection X-ray Fluorescence - Spectroscopy for Microcontamination Analysis on Silicon Wafer Surfaces

As dimensions in state-of-the-art CMOS devices shrink to less than 0.1 pm, even low levels of impurities on wafer surfaces can cause device degradation. Conventionally, metal contamination on wafer surfaces is measured using Total Reflection X-Ray Fluorescence Spectroscopy (TXRF). However, commercially available TXRF systems do not have the necessary sensitivity for measuring the lower levels o...

متن کامل

Laboratory and Synchrotron Radiation total – reflection X-ray fluorescence: New Perspectives in Detection Limits and Data Analysis

Having established detection limits for transition elements exceeding current requirements of the semiconductor industry, our recent efforts at the Stanford Synchrotron Radiation Laboratory (SSRL) have focused on the improvement of the detection sensitivity for light elements such as Al. Data analysis is particularly challenging for Al, due to the presence of the neighboring Si signal from the ...

متن کامل

Application of Synchrotron Radiation to TXRF analysis of metal contamination on silicon wafer surfaces

Synchrotron Radiation based Total Reflection X-ray Fluorescence (TXRF) has been shown to meet the critical needs of the semiconductor industry for the analysis of transition metal impurities on silicon wafer surfaces. The current best detection limit achieved at the Stanford Synchrotron Radiation Laboratory (SSRL) for Ni is 8 x 10 atoms/cm which is a factor of 50 better than what can be achieve...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001