Research on Pressed Pile Test and Finite Element Analysis of Large-diameter Steel Pipe Pile of Zhanjiang Port
نویسندگان
چکیده
In order to study pressed pile test and ultimate bearing capacity character of large-diameter steel pipe pile, based on two high-piled wharfs of Zhanjiang Port, pressed pile test and numerical simulation of three large-diameter steel pipe piles are analyzed in this paper. Anchored pile method is used to pressed pile test, and the curves of Q-s and ultimate bearing capacity are attained. Then the three piles are numerically simulated by ABAQUS, and results of numerical simulation and those of field test are comparatively analyzed. The results show that settlement value of numerical simulation is larger than that of field test in the process of loading, the difference value is widening with the increasing of load, and the ultimate difference value of settlement is 20% to 30%. Keywords—Large-diameter steel pipe pile, field test, finite element analysis, comparative analysis.
منابع مشابه
Nonlinear Dynamic Analysis of Pile Foundation Subjected to Strong Ground Motion Using Fiber Elements
In this paper, pile behavior embedded in layered soil deposits subjected to seismic loadings is analyzed using a nonlinear fiber element for simulation of soil – pile interactions. In the created model, both pile and surrounding soil are modeled using fiber elements in a practical Beam on Nonlinear Winkler Foundation (BNWF) concept. Herein, the features of DRAIN–3DX finite element software are ...
متن کاملDynamic Analysis of Embankments Reinforced with Micro-Piles
Application of micro-piles to stabilize unstable slopes has been widely considered in recent years. A micro-pile is a small-diameter (typically less than 300 mm), drilled, and grouted as non-displacement pile that is typically reinforced. The main objective of this study is to evaluate the influence of the micro-pile group on increasing safety factor as well as finding the optimum position of m...
متن کاملStudy of Loose Soil Layer Effects on Excavations Supported by Steel Sheet Pile Walls – A Numerical Study
Abstract Steel sheet pile walls are being widely used in civil engineering projects for support systems. Soil is not uniform in depth, sometimes may be exit loose or soft soil layer in various depth. This issue can cause different effects on ground surface displacements, forces and moments acting on sheet piles and struts during excavation procedure, compared with status that soil is uniform...
متن کاملInvestigation of Peak Particle Velocity Variations during Impact Pile Driving Process
Impact pile driving is a multi-component problem which is associated to multi-directional ground vibrations. At first, vibration is transferred from the hammer to the pile and then to the common interface of pile and soil. This is then transferred to the environment and has great impact on the adjacent structures, causing disturbance to residents and also damage to the buildings. It is of high ...
متن کاملFinite element analysis of elastic-plastic solids under Vickers indentation: surface deformation
Finite element modeling has been used to study the development of surface deformation during indentation with a Vickers indenter. A wide range of materials with different elastic modulus and yield stresses are examined. Results show that in a pyramidal indentation process, for a perfectly plastic material, sinking-in during loading can change to pile-up in unloading. This phenomenon depends on ...
متن کامل