MAGNETRON SPUTTERED Al-ZnO THIN FILMS FOR PHOTOVOLTAIC APPLICATIONS
نویسندگان
چکیده
The optimization process of the RF magnetron sputtered Al doped ZnO (AZO) thin films was carried out by studying its structural, optical, electrical, and morphological properties at different RF power and different working pressures for its use as a front-contact for the copper indium diselenide (CIS) based thin film solar cell. The structural study suggests that the preferred orientation of grains along the ( 002) plane having a hexagonal structure of the grains. The optical and electrical properties suggest that the films show an average transmission of 85 % and a resistivity of the order of 10-4 Wcm. The morphology analysis suggests the formation of packed grains having a homogeneous surface.
منابع مشابه
Characterisation of Thin Films CuIn1-xAlxSe2 Prepared by Selenisation of Magnetron Sputtered Metallic Precursors
Thin films of CuIn1-xAlxSe2 have been produced by the selenisation of magnetron sputtered Cu/In/Al precursor layers using elemental selenium and the chemical and physical properties of the layers have been determined for different conditions of synthesis. For optimum conditions of synthesis it was found possible to produce single phase films with the chalcopyrite structure. These films were pin...
متن کاملEffect of Silver Dopants on the ZnO Thin Films Prepared by a Radio Frequency Magnetron Co-Sputtering System
Ag-ZnO co-sputtered films at various atomic ratios of Ag (Ag/(Ag + Zn) at.%) were prepared by a radio frequency magnetron cosputtering system, using the co-sputtered targets of Ag and ZnO. The activation of the Ag acceptors (AgZn) and the formation of the Ag aggregations (Ag⁰) in the ZnO matrix were investigated from XRD, Raman scattering, and XPS measurements. The Ag-ZnO co-sputtered film beha...
متن کاملInfluence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique
In this study, NiTi thin films were deposited on the glass and NaCl substrates by means of magnetron sputtering method. The influence of aging temperature, over the range 300-500 oC, on phase transformation and mechanical properties of the sputtered NiTi thin films were studied by differential scanning calorimetry (DSC) and nano-indentation assay, respectively. The DSC curves showed that the ag...
متن کاملPhysical properties of metal-doped zinc oxide films for surface acoustic wave application
Metal-doped ZnO [MZO] thin films show changes of the following properties by a dopant. First, group III element (Al, In, Ga)-doped ZnO thin films have a high conductivity having an n-type semiconductor characteristic. Second, group I element (Li, Na, K)-doped ZnO thin films have high resistivity due to a dopant that accepts a carrier. The metal-doped ZnO (M = Li, Ag) films were prepared by radi...
متن کاملSynthesis and Characterization of DC Magnetron Sputtered ZnO Thin Films Under High Working Pressures
ZnO thin films were deposited on glass substrates using direct current (dc) magnetron sputtering under high working pressures. A pure zinc target was used, and sputtering was carried out in an oxygen atmosphere. The working pressure was varied between 50-800 mTorr. XRD characterization showed that for a window of working pressures between 300-500 mTorr, the deposited films were polycrystalline,...
متن کامل