Dynamic Behavior of a Three Dimensional Aluminum Truss

نویسندگان

  • Zaichun Feng
  • Marcus R. A. Heath
  • Ira Dyer
چکیده

The United States Navy sponsored Truss Damping Program is a research study in the area of submarine noise reduction. The research explores the feasibility of effectively attenuating noise associated with vibration of rotating machinery by means of a truss support structure. Such a structure occupies the entire machinery space by supporting all internal equipment. This thesis explores the dynamics of a three dimensional aluminum truss to determine the inherent type and degree of damping. By comparing experiments to analytic predictions, I learn that attenuation is due to strut radiation for all frequencies above a critical value. Close to the source of excitation the measured attenuation rate is higher because two mechanisms occur simultaneously: struts excited in flexure radiate effectively, and energy in the form of predominantly compressional or torsional waves scatters to energy comprising a more equal balance of compressional, torsional and flexural wave types. Other mechanisms of attenuation, including radiation from joints, losses in the interfaces between components and losses to ground through the supports, are negligible in comparison to the attenuation of scattering and strut radiation. From experimental results and supporting theory, I develop basic dynamic design guidelines. In full scale, the architect must maximize the quantity of unobstructed struts so that efficient radiation occurs. Maximizing the joints (minimizing cell size) near vibration sources and designing strut connections at or close to right angles promotes desirable scattering of wave types. Designs must consider global truss dynamic effects associated with relatively low frequency excitation, especially where the truss is effectively decoupled from the submarine's outer shell. These guidelines, when combined with fundamental requirements of submarine design, are useful in developing a specialized truss which provides an effective means of passively damping machinery-borne noise. Thesis Supervisor: Dr. Ira Dyer Title: Professor

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Inertial stabilization of buckling at high rates of loading and low test temperatures: Implications for dynamic crush resistance of aluminum-alloy-based sandwich plates with lattice core

In the present study, the dynamic compressive behavior of aluminum-alloy-based tetrahedral-core truss structures is investigated as a function of impact velocity using a split Hopkinson pressure bar. The results are used to understand the phenomenon of buckling in truss structures as a function of loading rates and test temperatures, and its implication on the dynamic crush resistance of tetrah...

متن کامل

The Effect of Viscous Dampers on Improvement of the Behavior of Tall Belt Truss Structures

Using energy absorption systems in the structures with malfunctioning components is of paramount importance. By absorbing the seismic energy, these systems help the components of the structure to remain resilient during earthquake. In the present study, viscous dampers were applied in order to enhance the reactions of tall building with belt truss. To assess the response of a structure un...

متن کامل

Nonlinear Analysis of Truss Structures Using Dynamic Relaxation (RESEARCH NOTE)

This paper presents a new approach for large-deflection analysis of truss structures employing the Dynamic Relaxation method (DR). The typical formulation for DR has been established utilizing the finite difference technique which is categorized as an explicit method. The special characteristic of the explicit method is its simple algebraic relationships in comparison with complicated matrix op...

متن کامل

ASSESSMENT OF MECHANICAL BEHAVIOR OF THE HOWE, PRATT AND BELGIUM WOOD TRUSS TYPE OPTIMIZED BY THE METHOD OF GENETIC ALGORITHMS

This paper presents the study of the optimized bi-dimensional wood structures, truss type, applying the method of genetic algorithms. Assessment is performed by means of a computer program called OPS (Optimization of Plane Structures). The purpose is to meet the optimum geometric configuration taking into account the volume reduction. Different strategies are considered for the positioning of d...

متن کامل

The Effect of Viscous Dampers on Improvement of the Behavior of Tall Belt Truss Structures

Using energy absorption systems in the structures with malfunctioning components is of paramount importance. By absorbing the seismic energy, these systems help the components of the structure to remain resilient during earthquake. In the present study, viscous dampers were applied in order to enhance the reactions of tall building with belt truss. To assess the response of a structure under e...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007