Preparation and characterization of alkylphosphonic acid self-assembled monolayers on titanium alloy by chemisorption and electrochemical deposition.

نویسندگان

  • Noah Metoki
  • Liang Liu
  • Edith Beilis
  • Noam Eliaz
  • Daniel Mandler
چکیده

Ti-6Al-4V alloy is the most commonly used alloy for dental and orthopedic implants. In order to improve osseointegration, different surface modification methods are usually employed, including self-assembled monolayers (SAMs). This study presents an investigation of both active (electroassisted) and passive (adsorption) approaches for the modification of Ti-6Al-4V using alkylphosphonic acid. The monolayers were characterized by cyclic voltammetry, double-layer capacitance, contact angle measurements, X-ray photoelectron spectroscopy, polarization modulation infrared reflection adsorption spectroscopy, electrochemical impedance spectroscopy, and corrosion potentiodynamic polarization measurements. It is shown that the electrochemically assisted monolayers, which are assembled faster, exhibit better control over surface properties, a superior degree of order, and a somewhat higher packing density. The electrosorbed SAMs also exhibit better blockage of electron transfer across the interface and thus have better corrosion resistance.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Self-assembled monolayers of alendronate on Ti6Al4V alloy surfaces enhance osteogenesis in mesenchymal stem cells

Phosphonates have emerged as an alternative for functionalization of titanium surfaces by the formation of homogeneous self-assembled monolayers (SAMs) via Ti-O-P linkages. This study presents results from an investigation of the modification of Ti6Al4V alloy by chemisorption of osseoinductive alendronate using a simple, effective and clean methodology. The modified surfaces showed a tailored t...

متن کامل

-functionalized self-assembled monolayers chemisorbed on ultraflat Au(111) surfaces for biological scanning probe microscopy in aqueous buffers

Two immobilization procedures for ultimately carrying out scanning probe microscopy of native biological macromolecules in buffer solution are presented. They are based on the preparation of ultraflat template-stripped gold surfaces and subsequent chemisorption of bioreactive -functionalized self-assembled monolayers. Immobilization was achieved either via amide bond formation or diazo linkage....

متن کامل

Optimizing the preparation procedure of self-assembled monolayer of stearic acid for protection of cupronickel alloy.

The aim of this work is to examine the possibility of CuNi protection in chloride media by self-assembled monolayers (SAMs) of stearic acid (SA). In order to obtain a compact, well ordered monolayer, that will provide long term protection, different SAM preparation procedures are studied. The influence of CuNi pretreatment, SA solution temperature and temperature of the drying period followed a...

متن کامل

Selective atomic layer deposition of titanium oxide on patterned self-assembled monolayers formed by microcontact printing.

We demonstrate a selective atomic layer deposition of TiO2 thin films on patterned alkylsiloxane self-assembled monolayers. Microcontact printing was done to prepare patterned monolayers of the alkylsiloxane on Si substrates. The patterned monolayers define and direct the selective deposition of the TiO2 thin film using atomic layer deposition. The selective atomic layer deposition is based on ...

متن کامل

Effect of Alkyl Chain Length on Carboxylic Acid SAMs on Ti-6Al-4V

The formation of methyl-terminated carboxylic acid self-assembled monolayers (SAMs) with even numbers of carbons, from eighteen to thirty, was investigated on the oxide surface of Ti-6Al-4V and component metal oxides. Modified surfaces were characterized using diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), matrix assisted laser desorption ionization-time of flight mass spe...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Langmuir : the ACS journal of surfaces and colloids

دوره 30 23  شماره 

صفحات  -

تاریخ انتشار 2014