Verified Safety and Information Flow of a Block Device

نویسنده

  • Paul T. Graunke
چکیده

This work reports on the author’s experience designing, implementing, and formally verifying a low-level piece of system software. The timing model and the adaptation of an existing information flow policy to a monadic framework are reasonably novel. Interactive compilation through equational rewriting worked well in practice. Finally, the project uncovered some potential areas for improving interactive theorem provers.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Water Velocity Measurements in Open Channels Using Volumetric Current Meter (VCM)

An innovative Volumetric Current Meter (VCM) was designed in order to allow quick velocity measurements in open channels. At first, the coefficient of velocity (Cv) of the device was determined through calibration under different water velocities in the laboratory. The measurement performance was verified by measurements performed in similar flows in irrigation channels using an ordinary curren...

متن کامل

Mechanical analysis of cluster-grain separator device of a new head of paddy harvesting machine

This paper presents stress and strain analysis of outer shaft shoulder (OSS) and inner shaft shoulder (ISS) of a new paddy harvesting head (PHH) using finite element method (FEM). Snapping grain unit is a part of this head, with OSS and ISS as its members. The analysis was performed using the ABAQUS software with Dynamics Explicit Solution Method. Eight-node block and four-node tetrahedral elem...

متن کامل

AGV (automated guided vehicle) robot: Mission and obstacles in design and performance

The AGV (automated guided vehicle) was introduced in UK in 1953 for transporting. But nowadays, due to their high efficiency, flexibility, reliability, safety and system scalability, they are used in various application in industries. In brief, the AGV robot is a system which typically made up of vehicle chassis, embedded controller, motors, drivers, navigation and collision avoidance sensors, ...

متن کامل

Twin Plate Weir: A Flow Measuring Device (TECHNICAL NOTE)

For efficient use of water, accurate measurement of flow in (field/laboratory) channels is required for many water resource projects. The present work is aimed to study the flow characteristics of a twin plate weir (two sharp-crested plates are placed one behind the other at some distance) under free and submerged flow conditions. Experiments are performed with four spacing of the twin plate we...

متن کامل

Gas Flow Metering Using the PSO Optimized Interval Type- 2 Fuzzy Neural Network

Orifice flow meter is one of the most common devices in industry which is used for measuring the gas flow. This system includes an orifice plate, temperature and pressure transmitters, and a flow computer. The flow computer is used for collecting information related to temperature, pressure, and their differences under various conditions. Also the flow computer can calculate the flow rate of ga...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Electr. Notes Theor. Comput. Sci.

دوره 217  شماره 

صفحات  -

تاریخ انتشار 2008